Date: Sun, 31 Aug 2003 15:10:52 -0500 From: Vulpes Velox <kitbsdlists@HotPOP.com> To: "Rick C. Petty" <rick@megan.kiwi-computer.com> Cc: freebsd-multimedia@freebsd.org Subject: Re: READ_CD various errors while ripping Message-ID: <20030831151052.54793c3d.kitbsdlists@HotPOP.com> In-Reply-To: <20030830175856.GA50261@megan.kiwi-computer.com> References: <20030830175856.GA50261@megan.kiwi-computer.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I would suggest trying it in different drives and then if you still get the error it is most likely some type of copy protection of some type. It is mo= st unlikely that all three drives suck for ripping. On Sat, 30 Aug 2003 12:58:56 -0500 "Rick C. Petty" <rick@megan.kiwi-computer.com> wrote: > Hello all. >=20 > I decided to rip my entire CD collection before I end up scratching every > disc I own... Using Grip/cdparanoia/lame, things were working pretty well > until I hit a few snags.. One of my discs wouldn't read properly. I took > it out and checked it for scratches-- couldn't find a thing. I put the CD > aside to try later. I finally got to "D" in my archives and I had three > similar failures in otherwise perfect-looking media. The last one I tried > was freshly opened (I removed the plastic wrapper) and I received the > failure again, checked the disc-- not even a speck of dust. I tried it in > all three of my optical drives-- here are the errors that are repeated > when trying to access different portions of the tracks (I only pasted one > per drive; each error is repeated for each attempt to read that track): >=20 > acd0: READ_CD - MEDIUM ERROR asc=3D0x02 ascq=3D0x00 error=3D0x04 > acd1: READ_CD - MEDIUM ERROR asc=3D0x02 ascq=3D0x00 error=3D0x00 > acd2: READ_CD - HARDWARE ERROR asc=3D0x09 ascq=3D0x01 error=3D0x00 >=20 > Just FYI: >=20 > acd0: DVD-R <SONY DVD RW DW-U10A> at ata0-slave UDMA33 > acd1: CD-RW <OPTORITE CD-RW CW4802> at ata1-master UDMA33 > acd2: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata1-slave > UDMA66 >=20 > also, atacontrol(1) shows these drives still at those UDMA transfer rates. > They burn most of my discs just fine-- only a few it's having troubles wi= th > (most often at the end of the last track, just prior to a data track, but > also twice at the start of the first track when there is no data track). > I'm assuming it might be an anomaly with the atapi driver. I've tried the > following techniques on each drive (with the exact same results): >=20 > cdparanoia -d <device> -X <track#> <wavfile> > dagrab -d <device> -n 128 -f <wavfile> <track#> > dd if=3D<device>t<track#> of=3D<pcmfile> bs=3D2352 >=20 > I have not tried ATAPI/CAM yet-- I try to reboot as seldom as possible, so > I might get around to it this month. I am using 5.1-RELEASE. Any help > would be appreciated. A special thanks to S=F8ren (sos) for getting > burncd(1) to work with DVD+RW media! >=20 > -- Rick C. Petty Senior Software Engineer, KIWI Computer > --------------------------------------------------------------- > rick@kiwi-computer.com http://www.kiwi-computer.com/ > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.= org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030831151052.54793c3d.kitbsdlists>