Date: Tue, 26 Nov 2002 11:27:51 -0800 (PST) From: Nate Lawson <nate@root.org> To: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> Cc: acpi-jp@jp.FreeBSD.org, current@freebsd.org Subject: Re: [acpi-jp 1940] Re: ACPI errors and then panic - fixed! Message-ID: <Pine.BSF.4.21.0211261121020.86535-100000@root.org> In-Reply-To: <20021121.233818.99449492.iwasaki@jp.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 21 Nov 2002, Mitsuru IWASAKI wrote: > > On Sat, 5 Oct 2002, Mitsuru IWASAKI wrote: > > > From: Nate Lawson <nate@root.org> > > > Subject: ACPI errors and then panic > > > Date: Fri, 4 Oct 2002 17:14:31 -0700 (PDT) > > > Message-ID: <Pine.BSF.4.21.0210041705180.96157-100000@root.org> > > > > > > > My laptop appears to work ok without ACPI but of course I don't get > > > > suspend, resume, etc. I have never been able to get ACPI to work with it, > > > > including with a -current as of 2 hours ago. If ACPI is enabled, I get a > > > > spew of: > > > > > > > > ACPI-0412 *** Error: NsSearchAndEnter: Bad character in ACPI name > > > > > > > > and then a panic from acpi_attach. > > > > I sent a reply including the requested traces on Oct 25. Do you need any > > more information? > > Please try with new ACPI CA patches at: > http://people.freebsd.org/~iwasaki/acpi/acpica-20021002-20021118-test20021121.diff > Some memory leak releated bugs were fixed, so your problem might be > solved by this hopefully. I did try the patch and am happy to report that my laptop boots with acpi enabled. Thank you! Please commit it before 5.0R. However, acpi doesn't seem to be working for me. Calls to check the battery status fail. Here is my dmesg and sysctl: hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: S1 hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 0 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 30 hw.acpi.thermal.tz0.temperature: 3252 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 3637 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3692 hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 98 hw.acpi.battery.time: -1 hw.acpi.battery.state: 4 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 --------------------------- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #11: Tue Nov 26 10:44:02 PST 2002 nate@laptop.root.org:/usr/src/sys/i386/compile/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0562000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05620a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 999153113 Hz CPU: Pentium III/Pentium III Xeon/Celeron (999.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 401997824 (383 MB) avail memory = 384696320 (366 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1A > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 Using $PIR table, 14 entries at 0xc00fdeb0 ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST acpi_button0: <Sleep Button> on acpi0 ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \\_SB_.LNKH: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1110 110 1110 1110 110 110 710 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKH: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1110 110 1110 1110 110 110 710 references: 1 priority: 685 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: USB Solid state disk, rev 1.10/1.00, addr 2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 as device 0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 cbb0: <TI1420 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 cbb0: <TI1420 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 pci2: <simple comms> at device 2.0 (no driver attached) fxp0: <Intel Pro/100 Ethernet> port 0x6400-0x643f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:d0:59:d7:62:b2 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xcf000-0xcffff,0xce000-0xcefff,0xc0000-0xcdfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR acpi_cmbat1: error fetching current battery status -- AE_ERROR acpi_cmbat1: battery initialization done, tried 1 times acpi_cmbat0: battery initialization done, tried 1 times ata1-slave: timeout waiting for interrupt ata1-slave: ATAPI identify failed system power profile changed to 'performance' acpi_acad0: On Line acpi_acad0: acline initialization done, tried 2 times ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100 acd0: CD-RW <UJDA720 DVD/CDRW> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Trek ThumbDrive Smart 1.11> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 63MB (129024 512 byte sectors: 64H 32S/T 63C) (da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing minimum_cmd_size to 10. Mounting root from ufs:/dev/ad0s4a acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0211261121020.86535-100000>