Date: Thu, 4 Nov 1999 22:32:56 -0500 From: Randall Hopper <aa8vb@ipass.net> To: Eric Kozowski <eric@haydenisland.verio.net> Cc: freebsd-hardware@freebsd.org, multimedia@freebsd.org, Roger Hardiman <roger@cs.strath.ac.uk> Subject: Re: bt848 w/ 3.3 Message-ID: <19991104223256.A29684@ipass.net> In-Reply-To: <19991101164348.G9313@schooner.svjava.com> References: <19991101164348.G9313@schooner.svjava.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Eric Kozowski: | |ok, now that i got the sound blaster working, i'm having trouble w/ a |bt848 based video capture card from video logic. | |the problem is that every time i put the bt848 card in (it's pci) i get |no video signal on my agp video card. take the bt848 back out and i get |video signal from the agp video card to my monitor again. | |kinda tough to troubleshoot w/ no video out. i searched the freebsd |archives and web site w/ no luck. anyone have any ideas? Strange. Don't know. You might try: - Check that you have all the IRQs and DMAs for your ISA cards allocated to ISA in your BIOS - Change which PCI slot the bt848 is in - Pull your other cards except for these two - For a test, do you have another video card to try with the bt848? - Do you have another machine connected to this one (via ethernet/slip/plip/etc.)? If so, build a kernel with bt848 support, boot into FreeBSD with the bt848, and check your /var/run/dmesg.boot for how its being detected - If not, you might try: build a kernel with bt848 support, install, make sure it works with your video card, reboot, power-off, snap the bt848 in, power on, boot into FreeBSD, let it get to the prompt, reboot, power-off, yank the bt848, power-on, and see what your /var/run/messages file has to say about the card and the driver's detection of it. These are _complete_ shots in the dark. In case you need some ideas. Hopefully though someone else will chime in and solve all your problems. ;-) FWIW, other folks on the multimedia list have had PCI bt848s working fine with AGP video cards for a year or so, so it's likely that this is related to your specific hardware or configuration. Randall To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991104223256.A29684>