Date: Sun, 9 Dec 2007 11:59:51 -0500 From: "Lyle Scott III" <portcitycs@gmail.com> To: freebsd-embedded@freebsd.org Subject: Re: Can't boot NanoBSD on an Alix board Message-ID: <5a1835cd0712090859r94e8375yb254ae193ee6d9f7@mail.gmail.com> In-Reply-To: <20071208.204814.-593216336.imp@bsdimp.com> References: <5a1835cd0712072157p5c75c63bo81b2397dc4dadd13@mail.gmail.com> <5a1835cd0712081917i17f55b5cy59b396cb1cd7f4da@mail.gmail.com> <20071208.204814.-593216336.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
and how might i do that on my flash card? I read a little about boot0cfg (man pages) and see the option -o packet .. is this what i need? how would i go about setting this in my flashcard that is mounted in another freebsd system? i read that packet mode == LBA mode BIOS setting? is this true? (http://lists.freebsd.org/pipermail/freebsd-current/2004-January/018907.html ) if so, LBA does not work either. The same result happens. i nudge in the right direction would be much appreciated :) On Dec 8, 2007 10:48 PM, M. Warner Losh <imp@bsdimp.com> wrote: > In message: <5a1835cd0712081917i17f55b5cy59b396cb1cd7f4da@mail.gmail.com> > "Lyle Scott III" <portcitycs@gmail.com> writes: > : ok, i just upgraded the BIOS and now it hands after choosing 1 for the > : bootloader: > : > : 640 KB Base Memory > : 261120 KB Extended Memory > : > : 01F0 Master 848A SanDisk SDCFB-512 > : Phys C/H/S 993/16/63 Log C/H/S 993/16/63 > : > : 1 FreeBSD > : > : Default: 1 > : [FREEZE] > > Try using the packet mode of boot0 > > Warner > -- Lyle Scott, III http://www.lylescott.ws
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5a1835cd0712090859r94e8375yb254ae193ee6d9f7>