Date: Fri, 3 Oct 2003 10:10:10 -0700 (PDT) From: Juan Rodriguez Hervella <jrh@it.uc3m.es> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/43491: microuptime () went backwards Message-ID: <200310031710.h93HAAN7064697@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/43491; it has been noted by GNATS. From: Juan Rodriguez Hervella <jrh@it.uc3m.es> To: freebsd-gnats-submit@FreeBSD.org, paul.leduc@appliedheuristics.com Cc: Subject: Re: i386/43491: microuptime () went backwards Date: Fri, 3 Oct 2003 19:00:23 +0200 --Boundary-00=_osaf/5UT5y+dT5k Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline I've got the same problem on my laptop: -- JFRH --Boundary-00=_osaf/5UT5y+dT5k Content-Type: text/plain; charset="us-ascii"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #1: Wed Oct 1 18:37:44 CEST 2003 jrh@cimborrio.it.uc3m.es:/usr/src/sys/compile/JUANILLO Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 200736768 (196032K bytes) avail memory = 189947904 (185496K bytes) Preloaded elf kernel "kernel" at 0xc051e000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1002 device=7010)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4337 graphics accelerator> at 5.0 pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 6.0 irq 5 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x10b9, dev=0x5457) at 8.0 pci_cfgintr_virgin: using routable interrupt 7 pci_cfgintr: 0:10 INTA routed to irq 7 pcic0: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic0: Could not map register memory 0xd0002000 device_probe_and_attach: pcic0 attach returned 12 uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2 uhub1: 3 ports with 3 removable, self powered uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 11.2 pci0: <unknown card> (vendor=0x104c, dev=0x8026) at 12.0 atapci0: <AcerLabs Aladdin ATA100 controller> port 0x2040-0x204f irq 0 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0 sis0: <NatSemi DP83815 10/100BaseTX> port 0x2400-0x24ff mem 0xd0008000-0xd0008fff irq 10 at device 18.0 on pci0 sis0: Ethernet address: 00:0d:9d:46:f2:c9 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdf000-0xdffff,0xe0000-0xe3fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pccard1: <PC Card 16-bit bus (classic)> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 38154MB <FUJITSU MHT2040AT> [77520/16/63] at ata0-master UDMA100 acd0: CD-RW <TOSHIBA DVD-ROM SD-R2312> at ata1-master WDMA2 Mounting root from ufs:/dev/ad0s2a cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA DVD-ROM SD-R2312 1905> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present WARNING: / was not properly dismounted pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcm0: <Acer Labs M5451> port 0x1000-0x10ff irq 5 at device 6.0 on pci0 pcm0: <Conexant CX20468 ac97 codec> pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 microuptime() went backwards (539.534085 -> 0.157555) acd0: READ_BIG command timeout - resetting ata1: resetting devices .. done acd0: READ_BIG command timeout - resetting ata1: resetting devices .. done acd0: READ_BIG command timeout - resetting ata1: resetting devices .. done acd0: READ_BIG command timeout - resetting acd0: trying fallback to PIO mode ata1: resetting devices .. done cd9660: Joliet Extension (Level 3) cd9660: Joliet Extension (Level 3) cd9660: Joliet Extension (Level 3) microuptime() went backwards (12906.850652 -> 12211.474341) --Boundary-00=_osaf/5UT5y+dT5k--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200310031710.h93HAAN7064697>