Date: Mon, 8 Feb 2010 09:26:54 -0800 From: David Wolfskill <david@catwhisker.org> To: x11@freebsd.org Subject: DRI problems with ati/radeon on stable/7 r203425 Message-ID: <20100208172654.GA391@bunrab.catwhisker.org>
next in thread | raw e-mail | index | archive | help
--O5XBE6gyVG5Rl6Rj Content-Type: multipart/mixed; boundary="YZ5djTAD1cGYuMQK" Content-Disposition: inline --YZ5djTAD1cGYuMQK Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I had written to ports@ some months ago; at the time, my laptop was configured to boot stable/6 from slice 1, stable/7 from slice 2, stable/8 from slice 3, and head from slice 4; all ports (save compat6x & compat7x) were built under stable/6. The reason for the message at the time was that I had found that sometimes -- though not always -- the laptop would seem to lock up instead of starting xdm (as it is configured to do). I found that while I could reliably use DRI while running X under stable/6, the only way I could find to run X built under stable/6 reliably under the other OSen was to disable DRI in xorg.conf. Given the recent activity in ports (with the upgrade to jpeg & every port that depends on it getting a bump over the weekend), I decided to "bite the bullet" and install all 800+ ports anew, building everything under stable/7, and bidding a rather fond farewall to stable/6. By yesterday afternoon, I had finally managed to get enough of the ports built to have a usable X environment, which worked OK -- though I noticed that I still had DRI disabled in xorg.conf (as an artifact of having last booted the laptop when the installed X.org had been built under stable/6). So in prepartation for the next boot, I re-enabled DRI in xorg.conf. Well, the time for the next boot has come, and from about 10 minutes before I started typing this note until just now, xdm would not start. Nor could I use ssh(1) to login to the machine, and attempting to login via serial got very sluggish response, to the point that it took a couple of minutes to echo the login I typed, and after I hit Enter, I got "Login timed out after 300 seconds" before the Password: prompt appeared. And the xdm login banner finally showed up; I'd estimate that was around 20 minutes of idle time before that happened. The ports tree is almost as up-to-date as my local SVN mirror, which was at r203541 as of Sat Feb 6 03:30:08 PST 2010. (Local CVS mirror had been updated from cvsup4 at around Sat Feb 6 04:46:28 PST 2010.) I had thought that the apparent "lock-ups" were because of an unaddressed issue in compat6x; I believe the recent evidence indicates otherwise. I've attached copies of: * /var/run/dmesg.boot * /var/log/Xorg.0.log * /var/log/xdm.log and would appreciate suggestions for resolving the issue. (Please include me in replies; while I am subscribed to ports@, I am not currently subscribed to x11@.) Thanks. Peace, david --=20 David H. Wolfskill david@catwhisker.org Depriving a girl or boy of an opportunity for education is evil. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --YZ5djTAD1cGYuMQK Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.3-PRERELEASE #55 r203425: Wed Feb 3 05:38:03 PST 2010 root@g1-135.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f51000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0f5114c. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0f511f8. Preloaded elf module "/boot/kernel/iwi_bss.ko" at 0xc0f512a4. Preloaded elf module "/boot/kernel/iwi_ibss.ko" at 0xc0f51350. Preloaded elf module "/boot/kernel/iwi_monitor.ko" at 0xc0f51400. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f514b0. Calibrating clock(s) ... i8254 clock: 1193178 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392954220 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte = line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte lin= e size real memory =3D 2147360768 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007db8cfff, 2092335104 bytes (510824 pages) avail memory =3D 2091487232 (1994 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 wlan_amrr: <AMRR Transmit Rate Control Algorithm> firmware: 'iwi_bss' version 300: 191142 bytes loaded at 0xc0e55000 firmware: 'iwi_ibss' version 300: 185660 bytes loaded at 0xc0e8673c firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xc0eb6000 wlan: <802.11 Link Layer> snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jan 31 2010 07:04:= 22) ACPI: RSDP @ 0x0xfde50/0x0014 (v 0 DELL ) ACPI: RSDT @ 0x0xfde64/0x002C (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: FACP @ 0x0xfde90/0x0074 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: DSDT @ 0x0xfffe4000/0x314E (v 1 INT430 SYSFexxx 0x00001001 MSFT 0x01= 00000E) ACPI: FACS @ 0x0x7ffff800/0x0040 ACPI: BOOT @ 0x0xfdf04/0x0028 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc51a1000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.FDIS -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB1.AD1_ -> bus 0 dev 29 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, ena= bled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc80, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc00, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c66, revid=3D0x01 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x01a7, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled pcib1: requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe0000000-0xe7fff= fff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type Memory, range 32, base 0xf8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type Memory, range 32, base 0xf8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05 domain=3D0, bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8ffe000, size 12, enabled pcib2: requested memory range 0xf8ffe000-0xf8ffefff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] xl0: [ITHREAD] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf4000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4000000 0x020000a0 0x20040302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0xf4000000-0xfbffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: [ITHREAD] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4001000 0x020000a0 0x20060502 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:07:2c:30:41 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xcaa740 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at de= vice 3.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8ffe000 iwi0: bpf attached iwi0: Ethernet address: 00:0e:35:aa:11:ca iwi0: bpf attached iwi0: bpf attached iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D3f ostat1=3D3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat1=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: reset tp2 stat0=3Dbf stat1=3Dbf devices=3D0x0 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 7db40000, 4000; 0xc527d000 -> 7db40000 pcm0: sndbuf_setmap 7db44000, 4000; 0xc5281000 -> 7db44000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 speaker0: <PC speaker> port 0x61,0x63,0x65,0x67 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] sio0: irq maps: 0x201 0x211 0x201 0x201 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console sio0: [FILTER] cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) pcf0 failed to probe on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134101 -> 100000 procfs registered Timecounter "TSC" frequency 2392954220 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining Linux ELF exec handler installed ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forward= ing enabled, default to deny, logging unlimited DUMMYNET with IPv6 initialized (040826) lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery0: battery initialization done, tried 1 times battery1: battery initialization start battery1: battery initialization done, tried 1 times ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: setting PIO4 on ICH3 chip ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pcm0: measured ac97 link rate at 48010 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present (probe0:ata0:0:1:0): (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0= =20 (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present Unretryable error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error pass0 at ata0 bus 0 target 1 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 pass0: 33.000MB/s transfers (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM: new disk cd0 scsi_cd.c::ioctl cmd=3D4400648b error=3D25 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted start_init: trying /sbin/init --YZ5djTAD1cGYuMQK Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="Xorg.0.log" Content-Transfer-Encoding: quoted-printable X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.3-PRERELEASE i386=20 Current Operating System: FreeBSD d254.dwolf.juniper.net. 7.3-PRERELEASE Fr= eeBSD 7.3-PRERELEASE #55 r203425: Wed Feb 3 05:38:03 PST 2010 root@g1-= 135.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY i386 Build Date: 07 February 2010 11:20:43AM =20 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (=3D=3D) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 8 08:46:57 2010 (=3D=3D) Using config file: "/usr/local/etc/X11/xorg.conf" (=3D=3D) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "AutoAddDevices" "False" (**) Not automatically adding devices (=3D=3D) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/deja= vu/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/dejavu/"). (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/webfonts/, /usr/local/lib/X11/fonts/URW/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/local/lib/xorg/modules" (II) Loader magic: 0x6a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000= ] rev 1, Mem @ 0xe0000000/134217728, 0xfcff0000/65536, I/O @ 0x0000c000/256= , BIOS @ 0x????????/65536 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specifie= d in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified i= n the config file. (II) "glx" will be loaded. This was enabled by default and also specified i= n the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified i= n the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org Server Extension, version 2.0 (=3D=3D) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "radeon" (II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so (II) Module radeon: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 6.12.4 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Mobility Radeon X1700, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400, ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon 4800 Series, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770, ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI RV670, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon RV710, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI RS880 (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) RADEON(0): TOTO SAYS 00000000fcff0000 (II) RADEON(0): MMIO registers at 0x00000000fcff0000: size 64KB (II) RADEON(0): PCI bus 1 card 0 func 0 (=3D=3D) RADEON(0): Depth 24, (--) framebuffer bpp 32 (II) RADEON(0): Pixel depth =3D 24 bits stored in 4 bytes (32 bpp pixmaps) (=3D=3D) RADEON(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x= 0000 (=3D=3D) RADEON(0): RGB weight 888 (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) (--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = =3D 0x4c66) (--) RADEON(0): Linear framebuffer at 0x00000000e0000000 (II) RADEON(0): AGP card detected (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/local/lib/xorg/modules//libint10.so (II) Module int10: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) RADEON(0): initializing int10 (=3D=3D) RADEON(0): Write-combining range (0xa0000,0x20000) was already cle= ar (=3D=3D) RADEON(0): Write-combining range (0xc0000,0x40000) was already cle= ar (II) RADEON(0): Primary V_BIOS segment is: 0xc000 (=3D=3D) RADEON(0): Write-combining range (0x0,0x1000) was already clear (II) RADEON(0): Legacy BIOS detected drmOpenDevice: node name is /dev/dri/card0 Failed to change owner or group for file /dev/dri! 2: No such file or direc= tory Failed to change owner or group for file /dev/dri/card0! 2: No such file or= directory drmOpenDevice: open result is -1, (No such file or directory) Failed to change owner or group for file /dev/dri/card0! 2: No such file or= directory drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module ver= sion 1.31.0 (=3D=3D) RADEON(0): Page Flipping disabled (II) RADEON(0): Will try to use DMA for Xv image transfers (II) RADEON(0): Detected total video RAM=3D65536K, accessible=3D65536K (PCI= BAR=3D131072K) (--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM) (II) RADEON(0): Color tiling enabled by default (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min= _in_pll: 40, max_in_pll: 3000, xclk: 19500, sclk: 240.000000, mclk: 195.000= 000 (II) RADEON(0): PLL parameters: rf=3D2700 rd=3D12 min=3D20000 max=3D35000; = xclk=3D19500 (II) RADEON(0): Panel ID string: SHP =20 (II) RADEON(0): Panel Size from BIOS: 1600x1200 (II) RADEON(0): BIOS provided dividers will be used. (WW) RADEON(0): LVDS Info: XRes: 1600, YRes: 1200, DotClock: 160000 HBlank: 512, HOverPlus: 56, HSyncWidth: 192 VBlank: 50, VOverPlus: 1, VSyncWidth: 3 (II) RADEON(0): Output VGA-0 using monitor section Monitor0 (II) RADEON(0): I2C bus "VGA-0" initialized. (II) RADEON(0): Output LVDS has no monitor section (II) RADEON(0): Output S-video has no monitor section (II) RADEON(0): Default TV standard: NTSC (II) RADEON(0): TV standards supported by chip: NTSC PAL=20 (II) RADEON(0): Port0: XRANDR name: VGA-0 Connector: VGA CRT1: INTERNAL_DAC1 DDC reg: 0x60 (II) RADEON(0): Port1: XRANDR name: LVDS Connector: LVDS LCD1: INTERNAL_LVDS DDC reg: 0x0 (II) RADEON(0): Port2: XRANDR name: S-video Connector: S-video TV1: INTERNAL_DAC2 DDC reg: 0x0 (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at ad= dress 0x60. (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0. (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 finished output detect: 0 (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2 finished output detect: 1 (II) RADEON(0): Output: S-video, Detected Monitor Type: 0 finished output detect: 2 finished all detect before xf86InitialConfiguration (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2 (II) RADEON(0): Added native panel mode: 1600x1200 (II) RADEON(0): Output: S-video, Detected Monitor Type: 0 (II) RADEON(0): Output VGA-0 disconnected (II) RADEON(0): Output LVDS connected (II) RADEON(0): Output S-video disconnected (II) RADEON(0): Using exact sizes for initial modes (II) RADEON(0): Output LVDS using initial mode 1600x1200 after xf86InitialConfiguration (=3D=3D) RADEON(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (=3D=3D) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (=3D=3D) RADEON(0): Using XAA acceleration architecture (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/local/lib/xorg/modules//libxaa.so (II) Module xaa: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.2.1 ABI class: X.Org Video Driver, version 5.0 (=3D=3D) RADEON(0): Assuming overlay scaler buffer width is 1536 (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable. (=3D=3D) RADEON(0): Write-combining range (0x0,0x1000) was already clear (!!) RADEON(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr = 1.2 support (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) RADEON(0): RADEONScreenInit e0000000 0 0 (=3D=3D) RADEON(0): Write-combining range (0xa0000,0x10000) was already cle= ar Entering TV Save Save TV timing tables saveTimingTables: reading timing tables TV Save done disable LVDS (II) RADEON(0): Dynamic Clock Scaling Disabled (=3D=3D) RADEON(0): Using 24 bit depth buffer (II) RADEON(0): RADEONInitMemoryMap() :=20 (II) RADEON(0): mem_size : 0x04000000 (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0 (II) RADEON(0): Depth moves disabled by default (II) RADEON(0): Using 8 MB GART aperture (II) RADEON(0): Using 1 MB for the ring buffer (II) RADEON(0): Using 2 MB for vertex/indirect buffers (II) RADEON(0): Using 5 MB for GART textures (II) RADEON(0): Memory manager initialized to (0,0) (1600,8191) (II) RADEON(0): Reserved area from (0,1600) to (1600,1602) (II) RADEON(0): Largest offscreen area available: 1600 x 6589 (II) RADEON(0): Will use front buffer at offset 0x0 (II) RADEON(0): Will use back buffer at offset 0x13ec000 (II) RADEON(0): Will use depth buffer at offset 0x1db0000 (II) RADEON(0): Will use 25088 kb for textures at offset 0x2774000 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables. (II) RADEON(0): [drm] framebuffer handle =3D 0xe0000000 (II) RADEON(0): [drm] added 1 reserved context for kernel (II) RADEON(0): X context handle =3D 0x1 (II) RADEON(0): [drm] installed DRM signal handler (=3D=3D) RADEON(0): Using AGP 4x (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x0000/0x0000; Card 0x1002/0x4c6= 6 0x1028/0x00d5] (II) RADEON(0): [agp] 8192 kB allocated with handle 0xc668be80 (II) RADEON(0): [agp] ring handle =3D 0xe8000000 (II) RADEON(0): [agp] Ring mapped at 0x48a90000 (II) RADEON(0): [agp] ring read ptr handle =3D 0xe8101000 (II) RADEON(0): [agp] Ring read ptr mapped at 0x486fe000 (II) RADEON(0): [agp] vertex/indirect buffers handle =3D 0xe8102000 (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4cc00000 (II) RADEON(0): [agp] GART texture map handle =3D 0xe8302000 (II) RADEON(0): [agp] GART Texture map mapped at 0x4ce00000 (II) RADEON(0): [drm] register handle =3D 0xfcff0000 (II) RADEON(0): [dri] Visual configs initialized (II) RADEON(0): RADEONRestoreMemMapRegisters() :=20 (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000 (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0 (=3D=3D) RADEON(0): Backing store disabled (II) RADEON(0): [DRI] installation complete (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers (II) RADEON(0): [drm] dma control initialized, using IRQ 11 (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808 (WW) RADEON(0): DRI init changed memory map, adjusting ... (WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000 (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe87fe800 (II) RADEON(0): RADEONRestoreMemMapRegisters() :=20 (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000 (II) RADEON(0): MC_AGP_LOCATION : 0xe87fe800 (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) RADEON(0): Acceleration enabled (**) Option "dpms" (**) RADEON(0): DPMS enabled (=3D=3D) RADEON(0): Silken mouse enabled (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x009c7200 (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x009cbd00 (II) RADEON(0): Largest offscreen area available: 1600 x 6583 (II) RADEON(0): No video input capabilities detected and no information is = provided - disabling multimedia i2c (II) Loading sub module "theatre_detect" (II) LoadModule: "theatre_detect" (II) Loading /usr/local/lib/xorg/modules/multimedia//theatre_detect_drv.so (II) Module theatre_detect: vendor=3D"X.Org Foundation" compiled for 1.6.1, module version =3D 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) RADEON(0): no multimedia table present, disabling Rage Theatre. (II) RADEON(0): Set up overlay video (II) RADEON(0): Set up textured video disable primary dac disable LVDS disable TV disable LVDS init memmap init common init crtc1 init pll1 restore memmap (II) RADEON(0): RADEONRestoreMemMapRegisters() :=20 (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000 (II) RADEON(0): MC_AGP_LOCATION : 0xe87fe800 restore common restore crtc1 restore pll1 set RMX set LVDS enable LVDS disable primary dac disable TV (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled mess= age. (--) RandR disabled (II) Setting vga for screen 0. (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) RADEON(0): Setting screen physical size to 423 x 317 (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/sysmouse" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/sysmouse" (=3D=3D) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5 6 7" (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 (**) Mouse0: Buttons: 11 (**) Mouse0: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) filter chain progression: 2.00 (**) Mouse0: (accel) filter stage 0: 20.00 ms (**) Mouse0: (accel) set acceleration profile 0 (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Mouse0: SetupAuto: protocol is SysMouse (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) --YZ5djTAD1cGYuMQK Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="xdm.log" Content-Transfer-Encoding: quoted-printable X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.3-PRERELEASE i386=20 Current Operating System: FreeBSD d254.dwolf.juniper.net. 7.3-PRERELEASE Fr= eeBSD 7.3-PRERELEASE #55 r203425: Wed Feb 3 05:38:03 PST 2010 root@g1-= 135.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY i386 Build Date: 07 February 2010 11:20:43AM =20 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (=3D=3D) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 8 08:46:57 2010 (=3D=3D) Using config file: "/usr/local/etc/X11/xorg.conf" (EE) Failed to load module "freetype" (module does not exist, 0) NTSC PAL=20 XRANDR name: VGA-0 Connector: VGA CRT1: INTERNAL_DAC1 DDC reg: 0x60 XRANDR name: LVDS Connector: LVDS LCD1: INTERNAL_LVDS DDC reg: 0x0 XRANDR name: S-video Connector: S-video TV1: INTERNAL_DAC2 DDC reg: 0x0 finished output detect: 0 finished output detect: 1 finished output detect: 2 finished all detect before xf86InitialConfiguration after xf86InitialConfiguration Entering TV Save Save TV timing tables saveTimingTables: reading timing tables TV Save done disable LVDS disable primary dac disable LVDS disable TV disable LVDS init memmap init common init crtc1 init pll1 restore memmap restore common restore crtc1 restore pll1 set RMX set LVDS enable LVDS disable primary dac disable TV --YZ5djTAD1cGYuMQK-- --O5XBE6gyVG5Rl6Rj Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iEYEARECAAYFAktwSV0ACgkQmprOCmdXAD3p/gCfbS3liuJMuBT0hRkuvvKA6KGY Th8An21pUfix9Wgu2n/DOXV3nQKULenJ =iHSx -----END PGP SIGNATURE----- --O5XBE6gyVG5Rl6Rj--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100208172654.GA391>