Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 26 Apr 2002 01:28:15 +0300
From:      Stoian Mishinev <mishinev@digsys.bg>
To:        FreeBSD-STABLE <stable@FreeBSD.ORG>
Subject:   atracontrol
Message-ID:  <3CC882FF.7EFCF303@digsys.bg>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------DE7A5CA63DE4DA306FDF0FC5
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello List,

After building new world and kernel i've tryed atacontrol and get this:

bear:~ # atacontrol list
atacontrol: control device not found: No such file or directory
bear:~ # 

what this mean ?!!

Stoian Mishinev
--------------DE7A5CA63DE4DA306FDF0FC5
Content-Type: text/plain; charset=us-ascii;
 name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Apr 26 00:51:43 EEST 2002
    mishinev@bear.digsys.bg:/usr/obj/usr/src/sys/BearISDN
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (733.36-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 402587648 (393152K bytes)
avail memory = 385175552 (376148K bytes)
Preloaded elf kernel "kernel" at 0xc0652000.
Preloaded elf module "vesa.ko" at 0xc065209c.
Preloaded elf module "linux.ko" at 0xc0652138.
Preloaded elf module "agp.ko" at 0xc06521d8.
Preloaded elf module "mga.ko" at 0xc0652274.
Preloaded elf module "drm.ko" at 0xc0652310.
netsmb_dev: loaded
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc00c5477 (c0005477)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fde70
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd4000000-0xd7ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <Matrox MGA G400 AGP graphics accelerator> mem 0xd1000000-0xd17fffff,0xd0000000-0xd0003fff,0xd8000000-0xd9ffffff at device 0.0 on pci1
info: [drm] AGP at 0xd4000000 64MB
info: [drm] Initialized mga 2.0.0 19991213 on minor 0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
an0: <Cisco Aironet 350 Series> port 0xc800-0xc83f,0xc400-0xc47f mem 0xda000000-0xda00007f irq 12 at device 9.0 on pci0
an0: Ethernet address: 00:07:0e:b9:7c:f9
vx0: <3COM 3C590 Etherlink III PCI> port 0xcc00-0xcc1f irq 11 at device 13.0 on pci0
utp/aui/bnc[*utp*] address 00:20:af:f4:cc:52
Warning! Defective early revision adapter!
vx0: driver is using old-style compatibility shims
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 12 at device 15.0 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xda001000-0xda00107f irq 10 at device 17.0 on pci0
xl0: Ethernet address: 00:01:02:06:3d:49
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 0xe800-0xe8ff,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
ata2: at 0xd800 on atapci1
ata3: at 0xe000 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPv6 packet filtering initialized, default to accept, unlimited logging
i4b: ISDN call control device attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
DUMMYNET initialized (011031)
i4btrc: 4 ISDN trace device(s) attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression)
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
IPsec: Initialized Security Association Processing.
ad4: 19607MB <QUANTUM FIREBALLP AS20.5> [39838/16/63] at ata2-master UDMA100
acd0: CDROM <CDU5211> at ata1-master PIO4
Mounting root from ufs:/dev/ad4s3a

--------------DE7A5CA63DE4DA306FDF0FC5--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CC882FF.7EFCF303>