Date: Wed, 6 Sep 2000 11:26:45 -0400 From: "Sean O'Connell" <sean@stat.Duke.EDU> To: FreeBSD mobile <freebsd-mobile@FreeBSD.ORG> Subject: Acer 600TER not resuming Message-ID: <20000906112645.H2059@stat.Duke.EDU>
next in thread | raw e-mail | index | archive | help
--WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi All- I am trying to get an Acer 600TER set up using FreeBSD 4.1-S. The machine runs pretty well and everything so far mostly works (see exceptions listed below) on it except for resuming from a suspend state. This machine has ATI Rage Mobility chipset in it, and I am trying to run it with XFree86-3.3.6. However, it still locks up regardless of whether I suspend from the console or from with X (note: X was running at the time I suspended form the console). I also, do not have any pccards in the machine (no need it has a built-in enet card ... yay!). It also will not resume properly with just issuing a "zzz". I will attach both a dmesg and my kernel. Other outstanding issues: 1) psm does not recognize the middle mouse scrolling wheel-like thing for the Synaptics Touchpad as a middle mouse button ... it believes it to only be a two-button mouse. 2) the CTRL-ALT-FN key sequence does not reliably put one in a virtual console (you have to hit various ones for a while before it swiches ... more annoying than anything else). 3) options PNPBIOS panics the machine (dmesg ends approx just before keyboard .. atkbd0 .. message) Thanks, S ----------------------------------------------------------------------- Sean O'Connell Email: sean@stat.Duke.EDU Institute of Statistics and Decision Sciences Phone: (919) 684-5419 Duke University Fax: (919) 684-8594 --WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Description: dmesg Content-Disposition: attachment; filename="acer.dmesg" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #0: Tue Sep 5 17:11:49 EDT 2000 root@mcbride:/usr/src/sys/compile/ACER Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (498.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 66977792 (65408K bytes) avail memory = 61706240 (60260K bytes) Preloaded elf kernel "kernel" at 0xc0353000. VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc02f7b82 (1000022) VESA: ATI MACH64 Pentium Pro MTRR support enabled apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 5 isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x9040-0x904f at device 2.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 11 at device 2.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR chip1: <Intel 82371AB Power management controller> port 0xf100-0xf10f at device 2.3 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x7480-0x74bf mem 0x80200000-0x802fffff,0x80100000-0x80100fff irq 5 at device 6.0 on pci0 fxp0: Ethernet address 00:d0:59:0e:a1:b9 pci0: <unknown card> (vendor=0x11c1, dev=0x0447) at 6.1 irq 5 pcm0: <ESS Solo-1 (unknown vendor)> port 0x7440-0x7443,0x7400-0x7403,0x70c0-0x70cf,0x7080-0x708f,0x7000-0x703f irq 5 at device 8.0 on pci0 chip2: <PCI to CardBus bridge (vendor=1217 device=6872)> irq 11 at device 9.0 on pci0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33 acd0: CD-RW <UJDA310> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted --WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=ACER # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: ACER,v 1.2 2000/09/04 16:32:40 root Exp root $ machine i386 cpu I686_CPU ident ACER maxusers 128 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options NFS #Network File System options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # options KTRACE #ktrace(1) syscall trace support # options DDB #drop into debugger # # SYSV Shared Memory # options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores # options SHMMAX="(64*1024*1024)" options SHMMNI=4096 options SHMSEG=256 # Real Time extensions ... for Linux threads compatibility (StarOffice) options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L # Add in support for wine options USER_LDT # Provide for SOFTUPDATES options SOFTUPDATES # Add VESA console modes (look cool) options VESA # Increase message buffer? N*pagesize options MSGBUF_SIZE=40960 # Add in ipfilter code options IPFILTER options IPFILTER_LOG # ICMP_BANDLIM enables icmp error response bandwidth limiting. You # typically want this option as it will help protect the machine from # D.O.S. packet attacks. options ICMP_BANDLIM # Busses device isa #options PNPBIOS device pci # Floppy drives (only USB) # User Soren's ATA/ATAPI code support device ata device atadisk # ATA drives device atapicd # ATAPI CDROM device atapifd # ATAPI floppy drive device atapist # ATAPI tape drive # SCSI support for both umass and vpo drivers... device scbus # Generic SCSI support device da # SCSI HDD (umass and vpo) device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 options PSM_HOOKRESUME #hook the system resume event, useful options PSM_RESETAFTERSUSPEND #reset the device at the resume event device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? options SC_NORM_ATTR="(FG_LIGHTGREY|BG_BLUE)" options SC_NORM_REV_ATTR="(FG_BLUE|BG_LIGHTGREY)" options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 # Advanced Power Management # PCCARD support device card device pcic0 at isa? options PCIC_RESUME_RESET # needed? # Serial (COM) ports (use PNPBIOS to handle sio) device sio0 at isa? port IO_COM1 irq 4 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel #device ppi # Parallel port interface device device vpo # || Zip drive Requires scbus and da0 # PCI Ethernet NICs. device fxp # Intel NIC # Sound: ESS Solo device pcm # sound # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun 1 # Packet tunnel, for ppp(1) pseudo-device pty 128 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's pseudo-device bpf 4 # Berkeley packet filter pseudo-device vn 1 # Vnode driver (turns file into device) pseudo-device speaker #Play IBM BASIC-style noises # USB support device uhci # UHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da0 device ums # Mouse # USB Ethernet #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet --WIyZ46R2i8wDzkSu-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000906112645.H2059>