Date: Mon, 19 Jun 1995 00:31:39 +0200 (MET DST) From: jan@todonix.ping.de (Jan Wedekind) To: bugs@freebsd.org Subject: 2.05R reboot hangs Message-ID: <m0sNSsV-000720C@todonix.ping.de>
next in thread | raw e-mail | index | archive | help
Hi,
sometimes the reboot hangs on an 486-DX4-100 PCI (ASUS4SP3G - Board).
the kernel config is as follows. (no more devices are configured!)
Jan
FreeBSD 2.0.5-RELEASE #5: Sun Jun 18 19:53:26 MET DST 1995
root@leary:/usr/src/sys/compile/DEBUG
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping=0
Features=0x3<FPU,VME>
real memory = 33161216 (8096 pages)
avail memory = 30523392 (7452 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:40:95:e0:29:37, type NE2000 (16 bit)
lpt0 at 0x378-0x37f on isa
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
cy0 irq 10 maddr 0xd4000 msize 8192 on isa
cy1 irq 11 maddr 0xd6000 msize 8192 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the pci0 bus:
configuration mode 2 allows 16 devices.
chip0 <Intel 82424ZX cache DRAM controller> rev 4 on pci0:0
ncr0 <ncr 53c810 scsi> rev 1 int a irq 14 on pci0:1
reg20: virtual=0xf4a48000 physical=0xfbfef000 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl21 95/03/21)
(ncr0:0:0): "FUJITSU M2684S-512 2035" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
507MB (1039329 512 byte sectors)
chip1 <Intel 82378IB PCI-ISA bridge> rev 3 on pci0:2
vga0 <VGA-compatible display device> rev 0 int a irq 15 on pci0:5
ncr1 <ncr 53c810 scsi> rev 2 int a irq 9 on pci0:6
reg20: virtual=0xf4a49000 physical=0xfafff000 size=0x100
ncr1: restart (scsi reset).
ncr1 scanning for targets 0..6 (V2 pl21 95/03/21)
(ncr1:4:0): "HP HP35470A 1109" type 1 removable SCSI 2
st0(ncr1:4:0): Sequential-Access
st0(ncr1:4:0): 200ns (5 Mb/sec) offset 8.
density code 0x13, drive empty
pci0: uses 8389120 bytes of memory from fafff000 upto fbfef0ff.
pci0: uses 512 bytes of I/O space from e400 upto e8ff.
pid 178: tail: uid 0: exited on signal 3
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0sNSsV-000720C>