Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 03 Nov 2005 09:46:43 +0900 (JST)
From:      Munehiro Matsuda <haro@h4.dion.ne.jp>
To:        jkim@freebsd.org, robert.moore@intel.com
Cc:        freebsd-acpi@freebsd.org, freebsd-current@freebsd.org
Subject:   Re: Panic on boot with new ACPI-CA
Message-ID:  <20051103.094643.74756456.haro@h4.dion.ne.jp>
In-Reply-To: <971FCB6690CD0E4898387DBF7552B90E0346CAFB@orsmsx403.amr.corp.intel.com>
References:  <971FCB6690CD0E4898387DBF7552B90E0346CAFB@orsmsx403.amr.corp.intel.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

Thanks for looking.
I've put the output dsdt/asl file from following command onto the
URL below.

command:
  # acpidump -t -d -o Dynabook_MX190R.dsdt > Dynabook_MX190R.asl

URL:
  http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.dsdt
  http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.asl

Thanks in advance,
  Haro

From: "Moore, Robert" <robert.moore@intel.com>
Date: Wed, 2 Nov 2005 09:51:23 -0800
::If you will send me the acpidump for the machine, I will take a look at
::the problem.
::
::Thanks,
::Bob
::
::
::> -----Original Message-----
::> From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd-
::> acpi@freebsd.org] On Behalf Of Munehiro Matsuda
::> Sent: Wednesday, November 02, 2005 7:08 AM
::> To: jkim@freebsd.org
::> Cc: freebsd-acpi@freebsd.org; freebsd-current@freebsd.org
::> Subject: Panic on boot with new ACPI-CA (Re: [HEADSUP] ACPI-CA
::20051021
::> import)
::> 
::> From: Jung-uk Kim <jkim@FreeBSD.org>
::> Date: Tue, 1 Nov 2005 17:49:44 -0500
::> ::On Tuesday 01 November 2005 05:01 pm, Jung-uk Kim wrote:
::> ::> ACPI-CA 20051021 will be imported any minute now.  I will let you
::> ::> know when completed.
::> ::
::> ::ACPI-CA 20051021 import is completed.
::> ::
::> ::Thanks!
::> ::
::> ::Jung-uk Kim
::> 
::> Hi,
::> 
::> After the import of new ACPI-CA code, I get system panic on boot,
::> where I used to get "can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ -
::> AE_BAD_DATA" message.
::> 
::> If you need more info, please let me know.
::> 
::> Here's hand written down panic messages.
::>
::=-----------------------------------------------------------------------
::--
::> -
::> npx0: [FAST]
::> npx0: <math processor> on motherboard
::> npx0: INT 16 interface
::> acpi0: <TOSHIB 750> on motherboard
::> acpi0: Power Button (fixed)
::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
::> Memory modified after free 0xc1ee1600(124) val=c @ 0xc1ee1600
::> panic: Most recently used by acpica
::> 
::> cpuid = 0
::> KDB: enter: panic
::> [thread pid 0 tid 0]
::> Stopped at   kbt_enter+0x2b: nop
::> db> bt
::> Tracing pid 0 tid 0 td 0xc0736780
::> kdb_enter(c06cc93e) at kdb_enter+0x2b
::> panic(c06e42e7,c089c1a8,c06e42b8,c1ee1600,8c) at panic+0x127
::> mtrash_ctor(c1ee1600,80,0,1) at mtrash_ctor+0x4d
::> uma_zalloc_arg(c104a1e0,0,1) at uma_zalloc_arg+0x10f
::> malloc(68,c089ef00,1,c0c20bb4,c087e562) at malloc+0xb2
::> AcpiOsAllocate(68,0,c1ece1e0,4,c0c20be0) at AcpiOsAllocate+0x12
::> AcpiUtCallocate(68,10,c089b337,157,c0c20bec) at AcpiUtCallocate+0x16
::> AcpiGetObjectInfo(c1ece1e0,c0c20bf8,0,c1ece1e0,ffffffff) at
::> AcpiGetObjectInfo+0x5b
::> acpi_MatchHid(0,c089f740,6,c1ece1e0,0) at acpi_MatchHid+0x32
::> acpi_probe_child(c1ece1e0,4,c1e9c800,0,0) at acpi_probe_child+0x94
::> AcpiNsWalkNamespace(0,ffffffff,64,1,c0883c98) at
::AcpiNsWalkNamespace+0xa1
::> AcpiWalkNamespace(0,ffffffff,64,c0883c98,c1e9c800) at
::> AcpiWalkNamespace+0x3b
::> acpi_attach(c1e9c800) at acpi_attach+0x4ff
::> device_attach(c1e9c800,0,c1e9c800,c1e9d300,0) at device_attach+0x58
::> device_probe_and attach(c1e9c800) at device_probe_and_attach+0xe0
::> bus_generic_attach(c1e9d300,c1e9d300,c1e9d300,c0c20d40,c0529340) at
::> bus_generic_attach+0x16
::> nexus_attach(c1e9d300) at nexus_attach+0x13
::> device_attach(c1e9d300,c0533914,c1e9d300,c0721bb0,c28000) at
::> device_attach+0x58
::> device_probe_and_attach(c1e9d300) at device_probe_and_attach+0xe0
::> root_bus_configure(c0c20d88,c04eb592,0,c1ec00,c1e000) at
::> root_bus_configure+0x16configure(0,c1ec00,c1e000,0,c04392f5) at
::> configure+0x9
::> mi_startup() at mi_startup+0x96
::> begin() at begine+0x2c
::>
::=-----------------------------------------------------------------------
::--
::> -
::> 
::> Following is boot message from the last kernel, just before the
::> import of new code.
::>
::=-----------------------------------------------------------------------
::--
::> -
::> Copyright (c) 1992-2005 The FreeBSD Project.
::> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
::1994
::> 	The Regents of the University of California. All rights
::reserved.
::> FreeBSD 7.0-CURRENT #135: Mon Oct 31 21:33:52 JST 2005
::>
::haro@legacy.ttr.kubota.co.jp:/home/haro/tmp/sys-7/i386/compile/LEGACY
::> WARNING: WITNESS option enabled, expect reduced performance.
::> Timecounter "i8254" frequency 1193182 Hz quality 0
::> CPU: Intel(R) Pentium(R) M processor 1.10GHz (1097.26-MHz 686-class
::CPU)
::>   Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
::> 
::>
::Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
::,P
::> AT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
::>   Features2=0x180<EST,TM2>
::> real memory  = 787808256 (751 MB)
::> avail memory = 761475072 (726 MB)
::> npx0: [FAST]
::> npx0: <math processor> on motherboard
::> npx0: INT 16 interface
::> acpi0: <TOSHIB 750> on motherboard
::> acpi0: Power Button (fixed)
::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
::> can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA
::> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
::> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
::> cpu0: <ACPI CPU> on acpi0
::> est0: <Enhanced SpeedStep Frequency Control> on cpu0
::> p4tcc0: <CPU Frequency Thermal Control> on cpu0
::> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
::> pci0: <ACPI PCI bus> on pcib0
::> pci0: <base peripheral> at device 0.1 (no driver attached)
::> pci0: <base peripheral> at device 0.3 (no driver attached)
::> agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port
::0xeff8-0xefff
::> mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0
::on
::> pci0
::> agp0: detected 16252k stolen memory
::> agp0: aperture size is 128M
::> pci0: <display> at device 2.1 (no driver attached)
::> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff
::irq
::> 10 at device 29.0 on pci0
::> uhci0: [GIANT-LOCKED]
::> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
::> usb0: USB revision 1.0
::> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> uhub0: 2 ports with 2 removable, self powered
::> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f
::irq
::> 11 at device 29.1 on pci0
::> uhci1: [GIANT-LOCKED]
::> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
::> usb1: USB revision 1.0
::> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> uhub1: 2 ports with 2 removable, self powered
::> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f
::irq
::> 11 at device 29.2 on pci0
::> uhci2: [GIANT-LOCKED]
::> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
::> usb2: USB revision 1.0
::> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> uhub2: 2 ports with 2 removable, self powered
::> ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-
::> 0xcfffffff irq 11 at device 29.7 on pci0
::> ehci0: [GIANT-LOCKED]
::> usb3: EHCI version 1.0
::> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
::> usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
::> usb3: USB revision 2.0
::> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
::> uhub3: 6 ports with 6 removable, self powered
::> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
::> pci1: <ACPI PCI bus> on pcib1
::> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11
::at
::> device 5.0 on pci1
::> iwi0: Ethernet address: 00:0e:35:c2:a2:7b
::> fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f
::mem
::> 0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
::> miibus0: <MII bus> on fxp0
::> inphy0: <i82562ET 10/100 media interface> on miibus0
::> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
::> fxp0: Ethernet address: 00:0e:7b:eb:71:23
::> cbb0: <TI6411 PCI-CardBus Bridge> at device 11.0 on pci1
::> cardbus0: <CardBus bus> on cbb0
::> pccard0: <16-bit PCCard bus> on cbb0
::> cbb1: <TI6411 PCI-CardBus Bridge> at device 11.1 on pci1
::> cardbus1: <CardBus bus> on cbb1
::> pccard1: <16-bit PCCard bus> on cbb1
::> fwohci0: <1394 Open Host Controller Interface> mem 0xcfefd800-
::> 0xcfefdfff,0xcfef8000-0xcfefbfff irq 11 at device 11.2 on pci1
::> fwohci0: OHCI version 1.10 (ROM=1)
::> fwohci0: No. of Isochronous channels is 4.
::> fwohci0: EUI64 00:00:39:00:00:72:41:eb
::> fwohci0: Phy 1394a available S400, 2 ports.
::> fwohci0: Link S400, max_rec 2048 bytes.
::> firewire0: <IEEE1394(FireWire) bus> on fwohci0
::> sbp0: <SBP-2/SCSI over FireWire> on firewire0
::> fwe0: <Ethernet over FireWire> on firewire0
::> if_fwe0: Fake Ethernet address: 02:00:39:72:41:eb
::> fwe0: Ethernet address: 02:00:39:72:41:eb
::> fwe0: if_start running deferred for Giant
::> fwohci0: Initiate bus reset
::> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
::> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
::> firewire0: bus manager 0 (me)
::> pci1: <base peripheral> at device 11.4 (no driver attached)
::> isab0: <PCI-ISA bridge> at device 31.0 on pci0
::> isa0: <ISA bus> on isab0
::> atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-
::> 0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
::> ata0: <ATA channel 0> on atapci0
::> ata1: <ATA channel 1> on atapci0
::> pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem
::> 0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on
::pci0
::> pcm0: [GIANT-LOCKED]
::> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
::> pci0: <simple comms, generic modem> at device 31.6 (no driver
::attached)
::> acpi_lid0: <Control Method Lid Switch> on acpi0
::> battery0: <ACPI Control Method Battery> on acpi0
::> acpi_button0: <Power Button> on acpi0
::> acpi_acad0: <AC Adapter> on acpi0
::> acpi_toshiba0: <Toshiba HCI Extras> on acpi0
::> acpi_tz0: <Thermal Zone> on acpi0
::> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
::> atkbd0: <AT Keyboard> irq 1 on atkbdc0
::> kbd0 at atkbd0
::> atkbd0: [GIANT-LOCKED]
::> psm0: <PS/2 Mouse> irq 12 on atkbdc0
::> psm0: [GIANT-LOCKED]
::> psm0: model Generic PS/2 mouse, device ID 0
::> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
::on
::> acpi0
::> sio0: type 16550A
::> pmtimer0 on isa0
::> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid
::> ORM0000 on isa0
::> sc0: <System console> at flags 0x100 on isa0
::> sc0: VGA <16 virtual consoles, flags=0x300>
::> sio1: configured irq 3 not in bitmap of probed irqs 0
::> sio1: port may not be enabled
::> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
::isa0
::> Timecounter "TSC" frequency 1097256406 Hz quality 800
::> Timecounters tick every 1.000 msec
::> ad0: 57231MB <HTS541060G9AT00 MB3WA5EJ> at ata0-master UDMA100
::> acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata1-master UDMA33
::> pccard1: Allocation failed for cfe 1
::> sio4: <KDDI W01K> at port 0x2f8-0x2ff irq 11 function 0 config 2 on
::> pccard1
::> sio4: type 16550A
::> sio4: unable to activate interrupt in fast mode - using normal mode
::> Trying to mount root from ufs:/dev/ad0s4a
::>
::=-----------------------------------------------------------------------
::--
::> -
::> 
::> Thanks in advance,
::>   Haro
::>
::=-----------------------------------------------------------------------
::--
::> -----
::>            _ _    Munehiro (haro) Matsuda
::>  -|- /_\  |_|_|   Internet Solution Dept., Kubota Graphics
::Technologies
::> Inc.
::>  /|\ |_|  |_|_|   2-8-8 Shinjuku Shinjuku-ku Tokyo 160-0022, Japan
::>                   Tel: +81-3-3225-0767  Fax: +81-3-3225-0740
::> 
::> 
::> _______________________________________________
::> freebsd-acpi@freebsd.org mailing list
::> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
::> To unsubscribe, send any mail to
::"freebsd-acpi-unsubscribe@freebsd.org"
::



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051103.094643.74756456.haro>