Date: Fri, 15 Dec 2000 10:40:37 -0800 (PST) From: Ray Qiu <ray_qiu@yahoo.com> To: freebsd-stable@freebsd.org Subject: kernel message Message-ID: <20001215184037.21723.qmail@web9106.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi,
First, sorry for the last e-mail. I clicked the wrong
link. :)
I got one problem here. I am using the 4.2-Stable.
The dmesg output always saying "no such service".
But no other error was found. How can I know what
service the kernel is referring to? I included the
"OPTIONS DIAGNOSTIC" in the kernel config but it
didn't
help.
Any help is appreciated!
The dmesg output is here:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.2-STABLE #0: Wed Dec 13 15:45:35 PST 2000
root@qiu:/usr/obj/usr/src/sys/QIU
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 800033910 Hz
CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class
CPU)
Origin = "AuthenticAMD" Id = 0x622 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 134152192 (131008K bytes)
avail memory = 127627264 (124636K bytes)
Preloaded elf kernel "kernel" at 0xc02e7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8391)>
at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port
0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 12
pci0: <VIA 83C572 USB controller> at 7.3 irq 12
pcm0: <VIA VT82C686A AC'97 Audio> port
0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 5 at
device 7.5 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xdc00-0xdcff mem
0xd8009000-0xd80090ff irq 10 at device 8.0 on pci0
dc0: Ethernet address: 00:a0:cc:d4:2b:6c
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on
miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
dc1: <82c169 PNIC 10/100BaseTX> port 0xe000-0xe0ff mem
0xd8008000-0xd80080ff irq 11 at device 9.0 on pci0
dc1: Ethernet address: 00:a0:cc:d4:16:40
miibus1: <MII bus> on dc1
ukphy1: <Generic IEEE 802.3u media interface> on
miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
pcm1: <Yamaha DS-1E (YMF724F)> mem
0xd8000000-0xd8007fff irq 5 at device 10.0 on pci0
pci0: <NVidia Riva Ultra Vanta TNT2 graphics
accelerator> at 11.0 irq 12
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP Filter: v3.4.8 initialized. Default = block all,
Logging = enabled
ad0: 19541MB <Maxtor 52049U4> [39703/16/63] at
ata0-master UDMA66
acd0: DVD-ROM <DVD-ROM BDV212B> at ata1-slave using
UDMA33
Mounting root from ufs:/dev/ad0s2a
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register!
17
no such service
no such service
no such service
no such service
no such service
no such service
no such service
no such service
no such service
no such service
.
.
.
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001215184037.21723.qmail>