Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Mar 2000 14:50:19 -0500
From:      Forrest Aldrich <forrie@forrie.com>
To:        Bill Fumerola <billf@chc-chimes.com>
Cc:        freebsd-questions@freebsd.org, freebsd-current@freebsd.org
Subject:   Re: 4.0 sysinstall fails to recognize disks
Message-ID:  <4.3.1.2.20000322144918.00b8d6c0@216.67.12.69>
In-Reply-To: <20000322144731.X25438@jade.chc-chimes.com>
References:  <4.3.1.2.20000322144026.00bb1c40@216.67.12.69> <4.3.1.2.20000322144026.00bb1c40@216.67.12.69>

next in thread | previous in thread | raw e-mail | index | archive | help

Sorry:

da4 at ahc0 bus 0 target 1 lun 0
da4: <QUANTUM ATLAS 10K 36SCA UCHD> Fixed Direct Access SCSI-3 device 
da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da4: 34732MB (71132998 512 byte sectors: 255H 63S/T 4427C)


_F

At 02:47 PM 3/22/00 -0500, Bill Fumerola wrote:
>On Wed, Mar 22, 2000 at 02:42:44PM -0500, Forrest Aldrich wrote:
>
> > Since this is a fairly current issue, I'm posting this appropriately.
> > 
> > I have a DELL server that has hooked up to it a PowerVault, with 8 36gb 
> > 10krpm LVD drives.   The system has recognized these previously and dmesg 
> > shows them present; however, /stand/sysinstall says that I don't have ANY 
> > disks installed when using Label or Fdisk.   
>
>The PowerVault is connected to a controller. Knowledge of which one would help.
>
>-- 
>Bill Fumerola - Network Architect
>Computer Horizons Corp - CVM
>e-mail: billf@chc-chimes.com / billf@FreeBSD.org
>Office: 800-252-2421 x128 / Cell: 248-761-7272
>
>




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.1.2.20000322144918.00b8d6c0>