Date: 03 Jan 2003 11:43:53 -0500 From: Matt Gostick <matt@crazylogic.net> To: freebsd-questions@freebsd.org Subject: archos and freebsd Message-ID: <1041612234.228.12.camel@gutrot.virtualservice.com>
next in thread | raw e-mail | index | archive | help
Hello, I got an Archos Jukebox Studio 20 for Christmas, and want to hook it up to my FreeBSD box. It's uses a usb cable for data transfer, and I've never had to use usb on FreeBSD before. I've done some research and the best page I could find with instructions was http://www.stalker.org/~sean/freebsd-p2040/... but the kernel config and supplied archos.sh script doesn't work for me. I'm a little behind when it comes to usb... is that what firewire is? On his page it says to compile firewire, sbp, scbus, da and umass. I'm cvsup'ed to 4.7 stable from release and did what he said. When I try and 'mount -t msdos /dev/da0s1 /archos' I get 'Device not configured'. Any advice would be greatly appreciated. Could you reply to my email address as well as the list please b/c I'm not subscribed. Thanks, Matt. Here is my dmesg: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #2: Fri Jan 3 10:07:48 EST 2003 root@gutrot.virtualservice.com:/usr/src/sys/compile/GUTROT Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 402640896 (393204K bytes) avail memory = 387649536 (378564K bytes) Preloaded elf kernel "kernel" at 0xc03c5000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00f0d10 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: In-System Design USB Storage Adapter, rev 1.10/1.10, addr 2 chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdf800000-0xdf80007f irq 5 at device 11.0 on pci0 xl0: Ethernet address: 00:10:5a:6a:4e:74 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <3Dfx Voodoo graphics accelerator> at 12.0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 pcm0: <SB16 DSP 4.16 (ViBRA16X)> on sbc0 ad0: 29311MB <Maxtor 5T030H3> [59554/16/63] at ata0-master UDMA33 ad1: 9787MB <QUANTUM FIREBALL CX10.2A> [19885/16/63] at ata0-slave UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-6402B> at ata1-master PIO4 acd1: CD-RW <CRW6206A> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a can't re-use a leaf (firewire_debug)! can't re-use a leaf (fwmem_debug)! module_register: module fwohci/firewire already exists! linker_file_sysinit "firewire.ko" failed to register! 17 can't re-use a leaf (sbp_debug)! module_register: module firewire/sbp already exists! Here is my kernel config file: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.48 2002/08/31 20:28:26 obrien Exp $ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GUTROT maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic # SCSI shit device scbus device da device umass device firewire # firewire bus code device sbp # requires scbus and da # For PnP/PCI sound cards device pcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1041612234.228.12.camel>