Date: Fri, 25 Dec 2009 22:31:13 +0100 From: Diego Depaoli <trebestie@gmail.com> To: Alexander Motin <mav@freebsd.org> Cc: freebsd-current <freebsd-current@freebsd.org> Subject: Re: ATA_CAM for extradummies Message-ID: <83e5fb980912251331r50f2de69s3158ab5dbcf7645e@mail.gmail.com> In-Reply-To: <4B331C07.1020706@FreeBSD.org> References: <1261624986.00198729.1261614601@10.7.7.3> <4B331C07.1020706@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 24, 2009 at 8:45 AM, Alexander Motin <mav@freebsd.org> wrote: > Diego Depaoli wrote: >> Trying to rip a DVD with ogmrip which uses libdvd[read | nav | css] my >> system becomes unusable. >> Syslog repeats many and many times: >> ahcich0: port is not ready (timeout 10000ms) tfd = 00000480 >> ahcich0: device ready timeout >> >> ahci0: <ATI IXP700 AHCI SATA controller> port >> >> I can only poweroff the machine since reboot hangs syncing the buffers. >> After restart, verbose dmesg causes kernel panic. > > As soon as your DVD drive is on PATA channel, errors are not directly > related to ripping. I think it is related to device scanning before it. > I think libdvd tries to send SCSI commands to SATA disks, which is not > handled properly by IXP700 AHCI controller. After adding device sg as suggested by @bf1783 to my kernel now I can see pass devices. Unfortunately that doesn't solve the other issues: - without ataati my DVD drive isn't detected - ripping DVD the system becomes unusable ahcich0: hardware reset ... ahcich0: SATA connect time=0ms status=00000123 ahcich0: port is not ready (timeout 10000ms) tfd = 00000480 Let me know if I can help someway Regards -- Diego Depaoli
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?83e5fb980912251331r50f2de69s3158ab5dbcf7645e>