Date: Sun, 5 Sep 1999 22:53:04 +0400 (MSD) From: Osokin Sergey <osa@etrust.ru> To: FreeBSD-currnet mail-list <freebsd-current@FreeBSD.org> Subject: ata0 can't detect my LS-120... Message-ID: <Pine.BSF.4.10.9909052247130.1906-100000@ozz.etrust.ru>
next in thread | raw e-mail | index | archive | help
Hello! Kernel can't detect my LS-120 which connected as slave-device at second IDE controller... at my kernel IDE-devices described like this: controller ata0 device atadisk0 #ATA disk drives device atapicd0 #ATAPI CDROM drives device atapifd0 #ATAPI floppy drives # dmesg ..... ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 ..... ata1: unwanted interrupt 1 status = 7f ..... ata0: master: setting up WDMA2 mode on PIIX3/4 chip OK ad0: <FUJITSU MPA3026AT/9147> ATA-3 disk at ata0 as master ad0: 2503MB (5126688 sectors), 5086 cyls, 16 heads, 63 S/T, 512 B/S ad0: piomode=4, dmamode=2, udmamode=-1 ad0: 16 secs/int, 0 depth queue, DMA mode Creating DISK ad0 Creating DISK wd0 ata0: slave: setting up WDMA2 mode on PIIX3/4 chip OK ad1: <QUANTUM FIREBALL_TM1080A/A6B.1T00> ATA-? disk at ata0 as slave ad1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S ad1: piomode=4, dmamode=2, udmamode=-1 ad1: 16 secs/int, 0 depth queue, DMA mode Creating DISK ad1 Creating DISK wd1 atapi: piomode=4, dmamode=2, udmamode=2 ata1: master: setting up UDMA2 mode on PIIX4 chip OK atapi: DMA transfer mode set Device acd0a: name slot allocation failed (Errno=17) Device acd0c: name slot allocation failed (Errno=17) acd0: <E-IDE CD-ROM CR-840S/Ver3.20C> CDROM drive at ata1 as master acd0: drive speed 687 - 8250KB/sec, 128KB cache, DMA acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked changing root device to wd0s1a Something wrong? Rgdz, Osokin Sergey aka oZZ, osa@etrust.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909052247130.1906-100000>