Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Mar 2013 03:38:59 +0000 (UTC)
From:      Adrian Chadd <adrian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r248782 - head/sys/mips/atheros
Message-ID:  <201303270338.r2R3cxO9033185@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: adrian
Date: Wed Mar 27 03:38:58 2013
New Revision: 248782
URL: http://svnweb.freebsd.org/changeset/base/248782

Log:
  Commit initial (unfinished!) support for the AR933x series of embedded
  CPUs.
  
  The AR933x is a mips24k based SoC with an AR9380 series SoC on board,
  two gigabit ethernet interfaces and an internal 10/100mbit ethernet
  switch.  There's also the normal interfaces (USB, ethernet, uart, GPIO.)
  
  The downside? There's a non-ns8250 UART device.
  
  With a very basic UART driver (not in this commit) the SoC is initialised
  and boots up.  I'll commit the UART code soon and then link it into the
  general setup path.
  
  This code is a re-implementation based from the Linux kernel / openwrt
  AR933x support.
  
  TODO:
  
  * UART (obviously)
  * All of the ethernet, USB and wifi SoC glue, including ethernet PLL
    programming.

Added:
  head/sys/mips/atheros/ar933x_chip.c   (contents, props changed)
  head/sys/mips/atheros/ar933x_chip.h   (contents, props changed)
  head/sys/mips/atheros/ar933x_uart.h   (contents, props changed)
  head/sys/mips/atheros/ar933xreg.h   (contents, props changed)

Added: head/sys/mips/atheros/ar933x_chip.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/mips/atheros/ar933x_chip.c	Wed Mar 27 03:38:58 2013	(r248782)
@@ -0,0 +1,268 @@
+/*-
+ * Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_ddb.h"
+
+#include <sys/param.h>
+#include <sys/conf.h>
+#include <sys/kernel.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/cons.h>
+#include <sys/kdb.h>
+#include <sys/reboot.h>
+
+#include <vm/vm.h>
+#include <vm/vm_page.h>
+
+#include <net/ethernet.h>
+
+#include <machine/clock.h>
+#include <machine/cpu.h>
+#include <machine/cpuregs.h>
+#include <machine/hwfunc.h>
+#include <machine/md_var.h>
+#include <machine/trap.h>
+#include <machine/vmparam.h>
+
+#include <mips/atheros/ar71xxreg.h>
+#include <mips/atheros/ar933xreg.h>
+
+#include <mips/atheros/ar71xx_cpudef.h>
+#include <mips/atheros/ar71xx_setup.h>
+
+#include <mips/atheros/ar71xx_chip.h>
+#include <mips/atheros/ar933x_chip.h>
+
+static void
+ar933x_chip_detect_mem_size(void)
+{
+}
+
+static void
+ar933x_chip_detect_sys_frequency(void)
+{
+	uint32_t clock_ctrl;
+	uint32_t cpu_config;
+	uint32_t freq;
+	uint32_t t;
+
+	t = ATH_READ_REG(AR933X_RESET_REG_BOOTSTRAP);
+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+		u_ar71xx_refclk = (40 * 1000 * 1000);
+	else
+		u_ar71xx_refclk = (25 * 1000 * 1000);
+
+	clock_ctrl = ATH_READ_REG(AR933X_PLL_CLOCK_CTRL_REG);
+	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
+		u_ar71xx_cpu_freq = u_ar71xx_refclk;
+		u_ar71xx_ahb_freq = u_ar71xx_refclk;
+		u_ar71xx_ddr_freq = u_ar71xx_refclk;
+	} else {
+		cpu_config = ATH_READ_REG(AR933X_PLL_CPU_CONFIG_REG);
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
+		freq = u_ar71xx_refclk / t;
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
+		freq *= t;
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
+		if (t == 0)
+			t = 1;
+
+		freq >>= t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
+		u_ar71xx_cpu_freq = freq / t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
+		u_ar71xx_ddr_freq = freq / t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
+		u_ar71xx_ahb_freq = freq / t;
+	}
+}
+
+static void
+ar933x_chip_device_stop(uint32_t mask)
+{
+	uint32_t mask_inv, reg;
+
+	mask_inv = mask;
+	reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
+	reg |= mask;
+	reg &= ~mask_inv;
+	ATH_WRITE_REG(AR933X_RESET_REG_RESET_MODULE, reg);
+}
+
+static void
+ar933x_chip_device_start(uint32_t mask)
+{
+	uint32_t mask_inv, reg;
+
+	mask_inv = mask;
+	reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
+	reg &= ~mask;
+	reg |= mask_inv;
+	ATH_WRITE_REG(AR933X_RESET_REG_RESET_MODULE, reg);
+}
+
+static int
+ar933x_chip_device_stopped(uint32_t mask)
+{
+	uint32_t reg;
+
+	reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
+	return ((reg & mask) == mask);
+}
+
+static void
+ar933x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
+{
+
+	/* XXX TODO */
+	return;
+}
+
+/*
+ * XXX TODO !!
+ */
+static void
+ar933x_chip_set_pll_ge(int unit, int speed, uint32_t pll)
+{
+
+	switch (unit) {
+	case 0:
+		/* XXX TODO */
+		break;
+	case 1:
+		/* XXX TODO */
+		break;
+	default:
+		printf("%s: invalid PLL set for arge unit: %d\n",
+		    __func__, unit);
+		return;
+	}
+}
+
+static void
+ar933x_chip_ddr_flush_ge(int unit)
+{
+
+	switch (unit) {
+	case 0:
+		ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE0);
+		break;
+	case 1:
+		ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE1);
+		break;
+	default:
+		printf("%s: invalid DDR flush for arge unit: %d\n",
+		    __func__, unit);
+		return;
+	}
+}
+
+static void
+ar933x_chip_ddr_flush_ip2(void)
+{
+
+	ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_WMAC);
+}
+
+static uint32_t
+ar933x_chip_get_eth_pll(unsigned int mac, int speed)
+{
+
+	return (0);
+}
+
+static void
+ar933x_chip_init_usb_peripheral(void)
+{
+#if 0
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7240:
+		ar71xx_device_stop(AR724X_RESET_MODULE_USB_OHCI_DLL |
+		    AR724X_RESET_USB_HOST);
+		DELAY(1000);
+
+		ar71xx_device_start(AR724X_RESET_MODULE_USB_OHCI_DLL |
+		    AR724X_RESET_USB_HOST);
+		DELAY(1000);
+
+		/*
+		 * WAR for HW bug. Here it adjusts the duration
+		 * between two SOFS.
+		 */
+		ATH_WRITE_REG(AR71XX_USB_CTRL_FLADJ,
+		    (3 << USB_CTRL_FLADJ_A0_SHIFT));
+
+		break;
+
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar71xx_device_start(AR724X_RESET_MODULE_USB_OHCI_DLL);
+		DELAY(100);
+
+		ar71xx_device_start(AR724X_RESET_USB_HOST);
+		DELAY(100);
+
+		ar71xx_device_start(AR724X_RESET_USB_PHY);
+		DELAY(100);
+
+		break;
+
+	default:
+		break;
+	}
+#endif
+}
+
+struct ar71xx_cpu_def ar933x_chip_def = {
+	&ar933x_chip_detect_mem_size,
+	&ar933x_chip_detect_sys_frequency,
+	&ar933x_chip_device_stop,
+	&ar933x_chip_device_start,
+	&ar933x_chip_device_stopped,
+	&ar933x_chip_set_pll_ge,
+	&ar933x_chip_set_mii_speed,
+	&ar71xx_chip_set_mii_if,
+	&ar933x_chip_ddr_flush_ge,
+	&ar933x_chip_get_eth_pll,
+	&ar933x_chip_ddr_flush_ip2,
+	&ar933x_chip_init_usb_peripheral
+};

Added: head/sys/mips/atheros/ar933x_chip.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/mips/atheros/ar933x_chip.h	Wed Mar 27 03:38:58 2013	(r248782)
@@ -0,0 +1,34 @@
+/*-
+ * Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef	__AR933X_CHIP_H__
+#define	__AR933X_CHIP_H__
+
+extern struct ar71xx_cpu_def ar933x_chip_def;
+
+#endif

Added: head/sys/mips/atheros/ar933x_uart.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/mips/atheros/ar933x_uart.h	Wed Mar 27 03:38:58 2013	(r248782)
@@ -0,0 +1,88 @@
+/*-
+ * Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ *  Atheros AR933x SoC UART registers
+ */
+#ifndef	__AR933X_UART_H__
+#define	__AR933X_UART_H__
+
+#define	AR933X_UART_REGS_SIZE		20
+#define	AR933X_UART_FIFO_SIZE		16
+
+#define	AR933X_UART_DATA_REG		0x00
+#define	AR933X_UART_CS_REG		0x04
+#define	AR933X_UART_CLOCK_REG		0x08
+#define	AR933X_UART_INT_REG		0x0c
+#define	AR933X_UART_INT_EN_REG		0x10
+
+#define	AR933X_UART_DATA_TX_RX_MASK	0xff
+#define	AR933X_UART_DATA_RX_CSR		(1 << 8)
+#define	AR933X_UART_DATA_TX_CSR		(1 << 9)
+
+#define	AR933X_UART_CS_PARITY_S		0
+#define	AR933X_UART_CS_PARITY_M		0x3
+#define	  AR933X_UART_CS_PARITY_NONE	0
+#define	  AR933X_UART_CS_PARITY_ODD	1
+#define	  AR933X_UART_CS_PARITY_EVEN	2
+#define	AR933X_UART_CS_IF_MODE_S	2
+#define	AR933X_UART_CS_IF_MODE_M	0x3
+#define	  AR933X_UART_CS_IF_MODE_NONE	0
+#define	  AR933X_UART_CS_IF_MODE_DTE	1
+#define	  AR933X_UART_CS_IF_MODE_DCE	2
+#define	AR933X_UART_CS_FLOW_CTRL_S	4
+#define	AR933X_UART_CS_FLOW_CTRL_M	0x3
+#define	AR933X_UART_CS_DMA_EN		(1 << 6)
+#define	AR933X_UART_CS_TX_READY_ORIDE	(1 << 7)
+#define	AR933X_UART_CS_RX_READY_ORIDE	(1 << 8)
+#define	AR933X_UART_CS_TX_READY		(1 << 9)
+#define	AR933X_UART_CS_RX_BREAK		(1 << 10)
+#define	AR933X_UART_CS_TX_BREAK		(1 << 11)
+#define	AR933X_UART_CS_HOST_INT		(1 << 12)
+#define	AR933X_UART_CS_HOST_INT_EN	(1 << 13)
+#define	AR933X_UART_CS_TX_BUSY		(1 << 14)
+#define	AR933X_UART_CS_RX_BUSY		(1 << 15)
+
+#define	AR933X_UART_CLOCK_STEP_M	0xffff
+#define	AR933X_UART_CLOCK_SCALE_M	0xfff
+#define	AR933X_UART_CLOCK_SCALE_S	16
+#define	AR933X_UART_CLOCK_STEP_M	0xffff
+
+#define	AR933X_UART_INT_RX_VALID	(1 << 0)
+#define	AR933X_UART_INT_TX_READY	(1 << 1)
+#define	AR933X_UART_INT_RX_FRAMING_ERR	(1 << 2)
+#define	AR933X_UART_INT_RX_OFLOW_ERR	(1 << 3)
+#define	AR933X_UART_INT_TX_OFLOW_ERR	(1 << 4)
+#define	AR933X_UART_INT_RX_PARITY_ERR	(1 << 5)
+#define	AR933X_UART_INT_RX_BREAK_ON	(1 << 6)
+#define	AR933X_UART_INT_RX_BREAK_OFF	(1 << 7)
+#define	AR933X_UART_INT_RX_FULL		(1 << 8)
+#define	AR933X_UART_INT_TX_EMPTY	(1 << 9)
+#define	AR933X_UART_INT_ALLINTS		0x3ff
+
+#endif /* __AR933X_UART_H__ */

Added: head/sys/mips/atheros/ar933xreg.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/mips/atheros/ar933xreg.h	Wed Mar 27 03:38:58 2013	(r248782)
@@ -0,0 +1,78 @@
+/*-
+ * Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef	__AR93XX_REG_H__
+#define	__AR93XX_REG_H__
+
+#define	REV_ID_MAJOR_AR9330		0x0110
+#define	REV_ID_MAJOR_AR9331		0x1110
+
+#define	AR933X_REV_ID_REVISION_MASK	0x3
+
+#define	AR933X_GPIO_COUNT		30
+
+#define	AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
+#define	AR933X_UART_SIZE	0x14
+#define	AR933X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+#define	AR933X_WMAC_SIZE	0x20000
+#define	AR933X_EHCI_BASE	0x1b000000
+#define	AR933X_EHCI_SIZE	0x1000
+
+#define	AR933X_DDR_REG_FLUSH_GE0	(AR71XX_APB_BASE + 0x7c)
+#define	AR933X_DDR_REG_FLUSH_GE1	(AR71XX_APB_BASE + 0x80)
+#define	AR933X_DDR_REG_FLUSH_USB	(AR71XX_APB_BASE + 0x84)
+#define	AR933X_DDR_REG_FLUSH_WMAC	(AR71XX_APB_BASE + 0x88)
+
+#define	AR933X_PLL_CPU_CONFIG_REG	(AR71XX_PLL_CPU_BASE + 0x00)
+#define	AR933X_PLL_CLOCK_CTRL_REG	(AR71XX_PLL_CPU_BASE + 0x08)
+
+#define	AR933X_PLL_CPU_CONFIG_NINT_SHIFT	10
+#define	AR933X_PLL_CPU_CONFIG_NINT_MASK		0x3f
+#define	AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT	16
+#define	AR933X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
+#define	AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT	23
+#define	AR933X_PLL_CPU_CONFIG_OUTDIV_MASK	0x7
+
+#define	AR933X_PLL_CLOCK_CTRL_BYPASS		(1 << 2)
+#define	AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT	5
+#define	AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK	0x3
+#define	AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT	10
+#define	AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK	0x3
+#define	AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT	15
+#define	AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK	0x7
+
+#define	AR933X_RESET_REG_RESET_MODULE		(AR71XX_RST_BLOCK_BASE + 0x1c)
+#define	AR933X_RESET_REG_BOOTSTRAP		(AR71XX_RST_BLOCK_BASE + 0xac)
+#define	AR933X_RESET_WMAC			(1 << 11)
+#define	AR933X_RESET_USB_HOST			(1 << 5)
+#define	AR933X_RESET_USB_PHY			(1 << 4)
+#define	AR933X_RESET_USBSUS_OVERRIDE		(1 << 3)
+
+#define	AR933X_BOOTSTRAP_REF_CLK_40		(1 << 0)
+
+#endif	/* __AR93XX_REG_H__ */



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201303270338.r2R3cxO9033185>