Date: Tue, 11 Nov 1997 14:51:10 -0800 (PST) From: Burton Sampley <bsampley@bsampley.vip.best.com> To: current@FreeBSD.org Subject: make world time???/ Message-ID: <Pine.BSF.3.96.971111142833.28037B-100000@bsampley>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Greetings, I'm really curious what people are doing to complete make world in such disgustingly low amount of time. I just recently upgraded from IDE to SCSI (IDE drives are still installed, but are presently not being used) and installed a 233-MMX (overclocked to 266 using 75MHz bus speed) and the best time I can get for make world is 3:00 hours. I started with source code from 9/11 with /usr/obj/ empty. I'm only using the plain-vanilla 'make world' from /usr/src. Any suggestion? Here's my hardware: MB: Asus P/I P55T2P4 rev 3.10 w/ BIOS rev 202 CPU: 233MHz MMX -> 266MHz w/ 75MHz bus speed RAM: 128MB EDO (BIOS is set to '60 NS' memory config) HD: Seagate 15150N SCSI (~12 platters, w/ 1 meg cache) SCSI: Adaptec 2940 All slices are mounted normally (ie, what ever the default /etc/fstab is). Here's the SCSI probe from dmesg: ahc0: <Adaptec 2940 SCSI host adapter> rev 0x03 int a irq 11 on pci0.11.0 ahc0: aic7870 Single Channel, SCSI Id=7, 16/255 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 ahc0: target 0 Tagged Queuing Device sd0 at scbus0 target 0 lun 0 sd0: <COMPAQ ST15150N 5216> type 0 fixed SCSI 2 sd0: Direct-Access 4094MB (8386000 512 byte sectors) (FYI: Even though it's ID'ed as COMPAQ - it's still a Seagate Baracuda 7200 RPM drive) Here's my kernel config file: machine "i386" cpu "I586_CPU" ident "custom30a" maxusers 10 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options "MAXMEM=(131072)" options AHC_TAGENABLE options AHC_SCBPAGING_ENABLE options AHC_ALLOW_MEMIO options SYSVSHM options SYSVSEM options SYSVMSG options PERFMON options PAS_JOYSTICK_ENABLE config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM controller ahc0 controller scbus0 device sd0 device od0 #See LINT for possible `od' options. device st0 device cd0 #Only need one of these, the code dynamically grows device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device de0 pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's options KTRACE #kernel tracing controller snd0 device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr device joy0 at isa? port "IO_GAME" - --------------- Burton Sampley bsampley@best.com or bsampley@haywire.csuhayward.edu PGP key available at http://www.best.com/~bsampley/pgp.html -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBNGjhZnt2O8KJtMdBAQG0GAP/fRXBfOu4kIfQqjh6GFubTZlx4W4C6eUZ ujB2wvo16V4CXEuOlU7U0Fhgmb2ON5PYDEml+p3olcH6nMPcYbhyt7+7Ed3RmdNk 7YV3qX1DsH2UaKrN7bG/9vLJPMAL/sfiavi0ZmW/ENcGpAPouxb1v5cTZPRPwFHH N3uKebg6xds= =bQrE -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971111142833.28037B-100000>