Date: Thu, 20 Apr 2000 23:56:44 +0200 (CEST) From: Stephane Legrand <Stephane.Legrand@bigfoot.com> To: freebsd-hardware@freebsd.org Cc: Mike Smith <msmith@freebsd.org>, Stephane Legrand <Stephane.Legrand@bigfoot.com> Subject: Boot problem with AcceleRAID 150 (was VALinux FullOn 2x2 with FreeBSD) Message-ID: <14591.32028.804492.576621@sequoia.mondomaineamoi.megalo> In-Reply-To: <14545.17741.355237.821095@sequoia.mondomaineamoi.megalo> References: <20000315113405.E74343@PacHell.TelcoSucks.org> <200003152050.MAA01297@mass.cdrom.com> <20000315153036.F74343@PacHell.TelcoSucks.org> <14545.17741.355237.821095@sequoia.mondomaineamoi.megalo>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, We finally received these servers and tried to install a 4.0-release (CD-Rom version) on one. The installation was really flawless but FreeBSD can't boot. The boot stops at the boot manager prompt with something like this : F1 FreeBSD F2 FreeBSD F3 FreeBSD F4 FreeBSD F5 other disk None function key works, there is only a "beep" and that's all. I also tried to boot on cd and load the kernel on the disk with a command like "boot mlxd(0,a)kernel" with no success. So, is there a "trick" to boot FreeBSD with this RAID controller ? Does the 4.0-release supports this controller also for boot or do we have to upgrade the system to 4.0-stable ? Do we have to try without the boot manager ? Thank you. Stephane Legrand. Stephane Legrand writes: > Ulf Zimmermann writes: > > On Wed, Mar 15, 2000 at 12:50:14PM -0800, Mike Smith wrote: > > > > > Does anyone know if the server VALinux FullOn 2x2 ("good" version : > > > > > http://www.valinux.com/systems/productinfo.html?product=16#raid) can > > > > > run with FreeBSD ? Every components of this server seem ok except for > > > > > the RAID controler which is a Mylex AcceleRAID 150. On this web page > > > > > (http://www.posi.net/freebsd/drivers/driver-info.phtml?ID=9), i read > > > > > that this card should be supported on FreeBSD 4.x but also that it has > > > > > never been tested with this special card. > > > > > > > > The Mylex AcceleRaid 150/250 is supported as bootable device since > > > > a few weeks. I am running a 250 currently and I am very happy with it. > > > > > > AFAIK, the 150 is the same as the 250, but with a slower processor. I > > > don't have one here in the lab, but I would be quite surprised if it > > > didn't work as expected. > > > > Differences are: > > > > 33 MHz against 66 MHz cpu > > Software Xor chip against hardware ASIC > > > > Thank you very much for your answers. I'll keep inform the list if > FreeBSD actually runs well with this server. > > Stephane Legrand. > -- Stephane.Legrand@bigfoot.com FreeBSD Francophone : http://www.freebsd-fr.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14591.32028.804492.576621>