Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 Aug 2003 21:03:05 -0400
From:      Chuck Swiger <cswiger@mac.com>
To:        stable@FreeBSD.org
Cc:        Don Lewis <truckman@FreeBSD.org>
Subject:   Re: Strange things going on with 4.8
Message-ID:  <3F417749.70208@mac.com>
In-Reply-To: <200308162150.h7GLojM7024139@gw.catspoiler.org>
References:  <200308162150.h7GLojM7024139@gw.catspoiler.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Don Lewis wrote:
> On 16 Aug, Kevin Oberman wrote:
[ ... ]
> None that I'm aware of.  The documentation for the older VIA chipsets
> claimed that they supported of ECC, but I never found a motherboard with
> one of these chipsets that supported ECC, and the last time I checked,
> the chipset documentation was only available to VIA's "parters" under
> NDA.  The only Athlon motherboards that I found with ECC support were
> the AMD 760 and 761, and those don't support anything faster than
> PC2100.

I've got a Shuttle AK31v3 motherboard (KT266/A chipset) which does 
registered+ECC memory:

System Mainboard
Manufacturer : HOLCO (Shuttle)
MP Support : No
Model : VT8366-8233
BIOS ID : 04/17/2002-VT8366-8233-6A6LVH2CC-00
Chipset : VIA KT266/A Chipset

[ ... ]
Logical/Chipset Memory Banks
Bank 0 Setting : 128MB DDR-SDRAM Registered 8-1-1-1R 4-1-1-1W 2.5-3-3CL 1CMD
Bank 1 Setting : 128MB DDR-SDRAM Registered 8-1-1-1R 4-1-1-1W 2.5-3-3CL 1CMD
Bank 2 Setting : 256MB DDR-SDRAM Registered 8-1-1-1R 4-1-1-1W 2.5-3-3CL 1CMD
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 1/1x

Memory Modules
Memory Module 1 : Micron 18VDDT3272DG-265Z1 080EBD07 256MB 18x(16Mx8) ECC 
DDR-SDRAM PC2100R-2533-750 (CL2.5 upto 133MHz) (CL2 upto 100MHz)
Memory Module 2 : Micron 9VDDT3272G-265B2 1B1B108E 256MB 9x(32Mx8) ECC DDR-SDRAM 
PC2100R-2533-750 (CL2.5 upto 133MHz) (CL2 upto 100MHz)

...but you and the other posters are right in pointing out the sad lack of ECC 
in newer AMD motherboards.  Most of the other systems which use DDR SDRAM that 
I've tried this memory in (including a VIA EPIA/M and an Xserve) not only can't 
enable ECC or enable registered mode memory access, they won't even POST.

-- 
-Chuck



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F417749.70208>