Date: Wed, 24 Feb 2010 11:02:22 +0100 From: Miroslav Lachman <000.fbsd@quip.cz> To: "Erik Scholtz, ArgonSoft GmbH" <escholtz@argonsoft.de> Cc: freebsd-fs@freebsd.org Subject: Re: Problem with writing an UFS2 to iStore Storage System / can't find block in cyl 0 / bad magic number Message-ID: <4B84F92E.8040305@quip.cz> In-Reply-To: <4B84EB1C.1080700@argonsoft.de> References: <4B84EB1C.1080700@argonsoft.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Erik Scholtz, ArgonSoft GmbH wrote: > Hi, > > I'm working on the problem I'm describing below since 12/2008. In Dec. > 2008 I was trying to connect an iStor iSCSI-Storage-System to my FreeBSD > (tested with all releases 6.4, 7.1, 7.2 and 8.0), which did not work. > > After having many tests and working together with Danny from the iSCSI > Development Team, I'm now pretty sure the problem is in the UFS-tools > and neither in the SCSI nor in the iSCSI-driver. > > I come to this conclusion, since I was able to get a filesystem working, > after extending my Kernel with ext-3 and using ext-3 as filesystem - so > SCSI and iSCSI seem to work properly. Did you tried partitioning with gpart and then UFS2 + SoftUpdates on /dev/da0p1? I am using it with 7.2-STABLE from January and iscsi_initiator 2.2.4 on Dell MD3000i (2.7TB partition) gpart create -s GPT da0 gpart add -b 34 -s 205520830 -t freebsd-ufs -l MyLabel da0 newfs -U /dev/da0p1 Just substitute 205520830 with size of your storage. Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B84F92E.8040305>