Date: Mon, 18 Nov 2013 19:32:13 +0700 From: Max Khon <fjoe@samodelkin.net> To: Amitabh Kant <amitabhkant@gmail.com> Cc: Harald Schmalzbauer <h.schmalzbauer@omnilan.de>, FreeBSD Stable <freebsd-stable@freebsd.org>, freebsd-isdn@freebsd.org Subject: Re: 9.2 panic with wcb4xxp (dahdi-kmod26-2.6.1.r10738) Message-ID: <CADe0-4nGJY9vWXYm31-3r44mpduhVGZ8s-Fi3BUYBnHcxJ3L-g@mail.gmail.com> In-Reply-To: <CAPTAQBLk3Ywhx4opXXLQW=AKnDmzFNk0GBE9oSa5T0o97arbZg@mail.gmail.com> References: <523B04C3.30100@omnilan.de> <CAPTAQBJrhpmvLHdmDP3Rnrm%2BEYfVr_bA6GHVXzfGDY=qY4aW-g@mail.gmail.com> <52405797.9020609@omnilan.de> <CAPTAQBLk3Ywhx4opXXLQW=AKnDmzFNk0GBE9oSa5T0o97arbZg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Amitabh, I suppose you are wrong about missing sysctls. Almost all dahdi module parameters are settable using kenv and then (after the driver is loaded) are visible via sysctl. Max On Tue, Sep 24, 2013 at 7:45 AM, Amitabh Kant <amitabhkant@gmail.com> wrote= : > On Mon, Sep 23, 2013 at 8:30 PM, Harald Schmalzbauer < > h.schmalzbauer@omnilan.de> wrote: > >> Bez=C3=BCglich Amitabh Kant's Nachricht vom 21.09.2013 03:24 (localtime= ): >> > On Thu, Sep 19, 2013 at 7:35 PM, Harald Schmalzbauer >> > <h.schmalzbauer@omnilan.de <mailto:h.schmalzbauer@omnilan.de>> wrote: >> > >> > Hello, >> > >> > unloading the kernel module of dahdi-kmod26-2.6.1.r10738 leads to >> this >> > panic: >> > >> > >> > <snip> >> > >> > wcb4xxp0: <6>Did not do the highestorder stuff >> > <6>dahdi: Detected time shift. >> > <5>dahdi_echocan_mg2: Registered echo canceler 'MG2' >> > >> > Starting asterisk afterwards also leads to panic. >> > I guess dahdi development stalled, but I wanted to try it because = I'd >> > prefer freeswitch and need BRI support... >> > Is somebody familiar with dahdi and interested in making it work w= ith >> > FreeBSD 9.2? >> > >> > Thanks, >> > >> > -Harry (not subscribed to isdn@) >> > >> > >> > >> > Have you been able to solve the problem? I am running Freeswitch (from >> > git, not port) and dahdi/dahdi-kmod26 (from port) with PRI line >> > (Digium 8 span and single span) without any problems on 9.1. Will test >> > it on 9.2 and get back to you if I see a panic . >> Hello Amitabh, >> >> couldn't solve my problem. >> First, dahdi_scan doesn't detect ports jumpered to NT mode. I need 2 por= ts >> in NT mode, so trying anything else with dahdi before my settings get >> correctly recognized is probably not worth the time. >> Also I have to investigate if it is still true that libpri doesn't suppo= rt >> ptmp in NT mode!?! >> In general, the freebsd dahdi port doesn't seem to be in good shape; >> Couldn't find any docs about sysctls (dahdi.wcb4xxp.teignorered, '-d' sh= ows >> nothing :-( ), no man page =E2=80=93 hard to find out anything about dah= di in >> FreeBSD, not even the supported hardwhere seems to be documentend >> anywhere... >> >> Any hints highly appreciated, although I think the better way was to tea= ch >> FreeTDM speaking CAPI. HPS does a great job keeping all kind of ISDN >> hardware supported by i4b (ISDN4BSD)! >> Or to make chan_capi work with asterisk11 =E2=80=93 the lesser evil than= fighting >> dahid... >> >> Thanks, >> >> -Harry >> >> >> > Hello Harry > > Sadly, there is not much help while installing/using dahdi on FreeBSD. > There does not seem to by any sysctls defined for dahdi which are needed = to > set for certain cards. Infact, for the 8 span card, to change the default > T1 to E1, I had to make changes in the code directly. > > > Amitabh > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADe0-4nGJY9vWXYm31-3r44mpduhVGZ8s-Fi3BUYBnHcxJ3L-g>