Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 16 Dec 2003 16:52:32 -0800
From:      richard michael bagstad <aeshmadeva@earthlink.net>
To:        questions@FreeBSD.org
Subject:   frustration
Message-ID:  <4C59B4B7-302B-11D8-A4A5-000393DC2A18@earthlink.net>

next in thread | raw e-mail | index | archive | help
i find this frustrating.  on your website (page  
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports- 
using.html)  the following tells me that 'from cd' and 'from internet'  
are exactly the same...  it does not tell me the directory of (ie.)  
lsof.  it simply tells me to 'make install'.  please help a poor green  
newbie.

4.5.2.1 Installing Ports from a CD-ROM

The FreeBSD Project's official CD-ROM images no longer include  
distfiles. They take up a lot of room that is better used for  
precompiled packages. CD-ROM products such as the FreeBSD PowerPak do  
include distfiles, and you can order these sets from a vendor such as  
the FreeBSD Mall . This section assumes you have such a FreeBSD CD-ROM  
set.

Place your FreeBSD CD-ROM in the drive. Mount it on /cdrom . (If you  
use a different mount point, the install will not work.) To begin,  
change to the directory for the port you want to install:
#cd /usr/ports/sysutils/lsof

Once inside the lsof directory, you will see the port skeleton. The  
next step is to compile, or ``build'', the port. This is done by simply  
typing make at the prompt. Once you have done so, you should see  
something like this:
#make >> lsof_4.57D.freebsd.tar.gz doesn't seem to exist in  
/usr/ports/distfiles/.
 >> Attempting to fetch from file:/cdrom/ports/distfiles/.
===>  Extracting for lsof-4.57
...
[extraction output snipped]
...
 >> Checksum OK for lsof_4.57D.freebsd.tar.gz.
===>  Patching for lsof-4.57
===>  Applying FreeBSD patches for lsof-4.57
===>  Configuring for lsof-4.57
...
[configure output snipped]
...
===>  Building for lsof-4.57
...
[compilation output snipped]
... #

Notice that once the compile is complete you are returned to your  
prompt. The next step is to install the port. In order to install it,  
you simply need to tack one word onto the make command, and that word  
is install :
#make install ===>  Installing for lsof-4.57
...
[installation output snipped]
...
===>   Generating temporary packing list
===>   Compressing manual pages for lsof-4.57
===>   Registering installation for lsof-4.57
===>  SECURITY NOTE:
       This port has installed the following binaries which execute with
       increased privileges. #

Once you are returned to your prompt, you should be able to run the  
application you just installed. Since lsof is a program that runs with  
increased privileges, a security warning is shown. During the building  
and installation of ports, you should take heed of any other warnings  
that may appear.

Note: You can save an extra step by just running make install instead  
of make and make install as two separate steps.

Note: Some shells keep a cache of the commands that are available in  
the directories listed in the PATH environment variable, to speed up  
lookup operations for the executable file of these commands. If you are  
using one of these shells, you might have to use the rehash command  
after installing a port, before the newly installed commands can be  
used. This is true for both shells that are part of the base-system  
(such as tcsh ) and shells that are available as ports (for instance,  
shells/zsh ).

Note: Please be aware that the licenses of a few ports do not allow for  
inclusion on the CD-ROM. This could be because a registration form  
needs to be filled out before downloading or redistribution is not  
allowed, or for another reason. If you wish to install a port not  
included on the CD-ROM, you will need to be online in order to do so  
(see the next section ).

4.5.2.2 Installing Ports from the Internet

As with the last section, this section makes an assumption that you  
have a working Internet connection. If you do not, you will need to  
perform the CD-ROM installation , or put a copy of the distfile into  
/usr/ports/distfiles manually.

Installing a port from the Internet is done exactly the same way as it  
would be if you were installing from a CD-ROM. The only difference  
between the two is that the distfile is downloaded from the Internet  
instead of read from the CD-ROM.

The steps involved are identical:
#make install >> lsof_4.57D.freebsd.tar.gz doesn't seem to exist in  
/usr/ports/distfiles/.
 >> Attempting to fetch from  
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/.
Receiving lsof_4.57D.freebsd.tar.gz (439860 bytes): 100%
439860 bytes transferred in 18.0 seconds (23.90 kBps)
===>  Extracting for lsof-4.57
...
[extraction output snipped]
...
 >> Checksum OK for lsof_4.57D.freebsd.tar.gz.
===>  Patching for lsof-4.57
===>  Applying FreeBSD patches for lsof-4.57
===>  Configuring for lsof-4.57
...
[configure output snipped]
...
===>  Building for lsof-4.57
...
[compilation output snipped]
...
===>  Installing for lsof-4.57
...
[installation output snipped]
...
===>   Generating temporary packing list
===>   Compressing manual pages for lsof-4.57
===>   Registering installation for lsof-4.57
===>  SECURITY NOTE:
       This port has installed the following binaries which execute with
       increased privileges. #



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C59B4B7-302B-11D8-A4A5-000393DC2A18>