Date: Tue, 30 Apr 2013 08:54:45 +0200 From: Jakob Alvermark <jakob@alvermark.net> To: Aleksander <aleek@FreeBSD.org> Cc: freebsd-arm@freebsd.org Subject: Re: could not process 'interrupts' property Message-ID: <C5E4F507-F3B1-43F2-B724-124942242BD3@alvermark.net> In-Reply-To: <CABkKHSYiT41e%2BTVse=isfXmREXTbUohALdezM4t78nDp%2B=3gzw@mail.gmail.com> References: <53141.85.229.95.25.1367181563.squirrel@alvermark.net> <CABkKHSYiT41e%2BTVse=isfXmREXTbUohALdezM4t78nDp%2B=3gzw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 29 apr 2013, at 11:54, Aleksander wrote: > this info is also shown, when you have no interrupt decoding function. = For example, for TI OMAP, the function is in sys/arm/ti/common.c [1] >=20 > [1] = http://svnweb.freebsd.org/base/head/sys/arm/ti/common.c?revision=3D239281&= view=3Dmarkup >=20 Yes, thank you for pointing in the right direction. It was a simple = typo. Now on to the next problem... > On Sun, Apr 28, 2013 at 10:39 PM, Jakob Alvermark = <jakob@alvermark.net> wrote: > Hi! >=20 > I got my hands on an Olinuxino A13 > (https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/) > It is based on the Allwinner A13, which is a stripped down A10 (no = SATA, > HDMI, only one USB host, fewer UARTs) >=20 > Since we have (limited) A10 support in HEAD I thought I would give it = a try. > Starting from cubieboard I essentially just removed the second USB = host > and changed UART0 to UART1. > When it boots I get the results below, "could not process 'interrupts' > property". > --=20 > regards > aleek
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C5E4F507-F3B1-43F2-B724-124942242BD3>