Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 20 Jan 2005 20:00:39 +0100
From:      Emanuel Strobl <emanuel.strobl@gmx.net>
To:        freebsd-stable@freebsd.org
Subject:   Re: Higher ATA-Mode -> lower speed
Message-ID:  <200501202000.43688.emanuel.strobl@gmx.net>
In-Reply-To: <200501201948.42707.emanuel.strobl@gmx.net>
References:  <200501201948.42707.emanuel.strobl@gmx.net>

next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1646911.PjIfmrZUXT
Content-Type: text/plain;
  charset="iso-8859-15"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Am Donnerstag, 20. Januar 2005 19:48 schrieb Emanuel Strobl:
> Dear ata interested guys,
>
> I observed a strange behaviour which seems to explain my often noticed
> "16MB/s hard-limit"
>
> I have a UDMA133 drive (MAXTOR 6L060J3) which saturates at 16MB/s when I
> dump anything to it, regardless of the block size. This transfer rate is
> reached with bs=3D4k and doesn't increase any more even not with bs=3D64k.
>
> Now, when I set the mode to UDMA100 I get well over 40MB/s!!!!
>
> Can anybody confirm that for different hw? Especially people like fandino
> who already discussed poor ata performance on -current (~16 Oct. 04).

I can confirm that for my workstation here. i815 chipset and seagate=20
ST380011A.
When set to UDMA100 (the maximum) the following dump gives 16MB/s 'dd=20
if=3D/dev/zero of=3D/usr/testfile bs=3D16k count=3D2000).
When I limit the mode to UDMA66 I get 53MB/s !!!!!!!!!!!!!!!!

It seems that's independent of UDMA133 instead it's when mode is set to the=
=20
maximum the chipset can handle!

This really hurts! But it's _the_ eplanation for all the "poor ata=20
performance" reports.

=2DHarry

>
> Why does UDMA133 mode limit the transfer speed so badly? And why do I get
> significantly slower transfer rates (32MB/s insted of 42MB/s) when I set
> the mode to UDMA66 (compared to UDMA100 but twice the speed of UDMA133)?
> There's only one device on the channel, so UDMA66 should be fine for
> 42MB/s. The controller is a HPT372.
>
> Best regards,
>
> -Harry

--nextPart1646911.PjIfmrZUXT
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (FreeBSD)

iD8DBQBB7//bBylq0S4AzzwRArKYAJ4mtS4/I7cpUnqvIrLzgO/MpWIe6gCff7WP
pHaAdinpIqJ34qpEI25zd/U=
=rO5Y
-----END PGP SIGNATURE-----

--nextPart1646911.PjIfmrZUXT--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200501202000.43688.emanuel.strobl>