Date: Tue, 23 Dec 2008 00:22:46 +0900 From: Alastair Hogge <agh@coolrhaug.com> To: freebsd-stable@freebsd.org Subject: Steelseries Ikari laser mouse. Message-ID: <200812230022.46822.agh@coolrhaug.com>
next in thread | raw e-mail | index | archive | help
Hey,
I have an Ikari laser mouse, and the blasted thing does not work on my system.
I've rebuilt a kernel with USB_DEBUG and umsdebug defined. The console will
spew some text if I move the mouse or if I click the mouse buttons, however no
pointer appears/or does anything, you can see the spew in my dmesg below. Look
out for the lines "ums_intr..."
uname:
FreeBSD madcat 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #2: Tue Dec 23 01:44:32
WST 2008 agh@madcat:/usr/obj/usr/src/sys/MADCAT i38
dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #2: Tue Dec 23 01:44:32 WST 2008
agh@madcat:/usr/obj/usr/src/sys/MADCAT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2999.97-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,<b26>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 4
real memory = 2146435072 (2047 MB)
avail memory = 2088128512 (1991 MB)
MPTable: <DP45SG INTEL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xc2000000-0xc2ffffff,0xa0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.2 on pci2
pci4: <PCI bus> on pcib4
hptrr0: <sx508x> port 0xd000-0xd0ff mem 0xc3100000-0xc31fffff irq 16 at device
4.0 on pci4
hptrr: adapter at PCI 4:4:0, IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xf0e0-0xf0ff mem
0xc3400000-0xc341ffff,0xc3424000-0xc3424fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:8c:09:75
uhci0: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 16 at device
26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 21 at device
26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 18 at device
26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc3425400-0xc34257ff irq 18 at
device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: waiting for BIOS to give up control
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 23 at device
29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 19 at device
29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xf020-0xf03f irq 18 at device
29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc3425000-0xc34253ff irq 23 at
device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: waiting for BIOS to give up control
usb7: timed out waiting for BIOS
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib5
fwohci0: <Lucent FW322/323> mem 0xc3300000-0xc3300fff irq 19 at device 0.0 on
pci5
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:2b:34:b9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:2b:34:b9
fwe0: Ethernet address: 02:90:27:2b:34:b9
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12d0000
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:2b:34:b9 @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf170-0xf17f,0xf160-0xf16f irq 19 at
device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port
0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf110-0xf11f,0xf100-0xf10f
irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd47ff pnpid ORM0000
on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on uhub0
uhub8: 4 ports with 4 removable, self powered
ukbd0: <DATACOMP SteelS????DATA, class 0/0, rev 1.10/0.01, addr 3> on uhub0
kbd2 at ukbd0
ums0: <DATACOMP SteelS????DATA, class 0/0, rev 1.10/0.01, addr 3> on uhub0
ums_attach: bLength=7 bDescriptorType=5 bEndpointAddress=2-in bmAttributes=3
wMaxPacketSize=5 bInterval=10
ums0: mouse has no X report
device_attach: ums0 attach returned 6
Timecounters tick every 1.000 msec
hptrr: start channel [0,1]
hptrr: start channel [0,2]
hptrr: start channel [0,3]
hptrr: start channel [0,4]
hptrr: start channel [0,5]
hptrr: channel [0,1] started successfully
hptrr: channel [0,2] started successfully
hptrr: channel [0,3] started successfully
hptrr: channel [0,4] started successfully
hptrr: channel [0,5] started successfully
hptrr0: [GIANT-LOCKED]
hptrr0: [ITHREAD]
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
da0 at hptrr0 bus 0 target 0 lun 0
da0: <HPT DISK 0_0 4.00> Fixed Direct Access SCSI-0 device
acd0: DVDR <PLEXTOR DVDR PX-716A/1.07> at ata0-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
ad6: 114473MB <Seagate ST3120026AS 3.05> at ata3-master SATA150
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-716A 1.07> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Trying to mount root from ufs:/dev/ad6s1a
Loading configuration files.
kernel dumps on /dev/da0s1b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/ad6s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1a: clean, 219646 free (1422 frags, 27278 blocks, 0.3% fragmentation)
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 188978 free (1418 frags, 23445 blocks, 0.6% fragmentation)
/dev/da0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1g: clean, 30775181 free (51725 frags, 3840432 blocks, 0.0%
fragmentation)
/dev/ad6s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1e: clean, 1982833 free (41 frags, 247849 blocks, 0.0% fragmentation)
/dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 5073397 free (1957 frags, 633930 blocks, 0.0%
fragmentation)
/dev/ad6s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1f: clean, 41156397 free (230869 frags, 5115691 blocks, 0.4%
fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 5077072 free (40 frags, 634629 blocks, 0.0% fragmentation)
/dev/ad6s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1d: clean, 310707 free (23579 frags, 35891 blocks, 2.4%
fragmentation)
/dev/da0s1h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1h: clean, 108196201 free (147161 frags, 13506130 blocks, 0.1%
fragmentation)
/dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1e: clean, 2487040 free (1992 frags, 310631 blocks, 0.1%
fragmentation)
Setting hostuuid: 00020003-0004-0005-0006-000700080009.
Setting hostid: 0x81f4ec68.
Mounting local file systems:
.
Setting hostname: madcat.
net.inet6.ip6.auto_linklocal:
1
->
0
vfs.usermount:
0
->
1
kern.ipc.shmmax:
33554432
->
67108864
kern.ipc.shmall:
8192
->
32768
compat.linux.osrelease:
2.4.2
->
2.6.16
kern.ipc.shm_allow_removed:
0
->
1
em0: no link ...
.
.
.
got link
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.4 -- renewal in 43200 seconds.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1db<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,POLLING,VLAN_HWCSUM,TSO4>
ether 00:1c:c0:8c:09:75
inet 192.168.1.4 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet 100baseTX <full-duplex>
status: active
route:
writing to routing socket
:
File exists
add net default: gateway 192.168.1.1: route already in table
Additional routing options:
.
Starting devd.
Configuring keyboard:
.
Additional IP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/lib /usr/local/lib/compat
/usr/local/lib/gcc/i386-portbld-freebsd7.0/3.4.6 /usr/local/lib/gnash
/usr/local/lib/graphviz /usr/local/lib/kde3 /usr/local/lib/mysql
/usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/wine
/usr/local/lib/zsh
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp.
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/da0s1b...
savecore: no dumps found
Initial i386 initialization:
.
Additional ABI support:
linux
.
Removing stale Samba tdb files:
done
Starting lighttpd.
Starting dbus.
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Starting bsdstats.
Posting monthly OS statistics to rpt.bsdstats.org
Configuring syscons:
blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
rtc
.
/etc/rc.d/sysctl: WARNING: sysctl hw.snd.verbose does not exist.
/etc/rc.d/sysctl: WARNING: sysctl hw.snd.maxautovchans does not exist.
Starting inetd.
Starting background file system checks in 60 seconds.
Tue Dec 23 01:51:38 WST 2008
ums0: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 4> on uhub8
ums_attach: bLength=7 bDescriptorType=5 bEndpointAddress=1-in bmAttributes=3
wMaxPacketSize=8 bInterval=1
ums0: 7 buttons and Z dir.
ums_attach: sc=0xc58c2800
ums_attach: X 64/16
ums_attach: Y 80/16
ums_attach: Z 96/8
ums_attach: B1 56/1
ums_attach: B2 57/1
ums_attach: B3 58/1
ums_attach: B4 59/1
ums_attach: B5 60/1
ums_attach: B6 61/1
ums_attach: B7 62/1
ums_attach: size=8, id=1
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 d0 ff 10 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 9b ff 30 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 cf ff 45 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 03 00 33 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 3b 00 17 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 4f 00 ed ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 29 00 e1 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 07 00 e3 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fc ff f3 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 f6 ff f8 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fd ff 02 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 f8 ff f8 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 06 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 f2 ff fe ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 e9 ff 02 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 e2 ff fc ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ef ff fa ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 eb ff ed ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 f5 ff e8 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fb ff ed ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 05 00 e2 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 07 00 f5 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 11 00 f3 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 18 00 f9 ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 1e 00 02 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 21 00 0f 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 35 00 21 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 1a 00 15 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 08 00 18 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fa ff 18 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 eb ff 15 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ee ff 0f 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fd ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fd ff fd ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 02 00 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 01 00 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 01 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 04 08 00 fe ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 04 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 04 04 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 02 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 01 00 00 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 ff ff 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fd ff 02 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 02 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fd ff 03 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 00 00 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 fe ff 01 00 00 00
ums_intr: sc=0xc58c2800 status=0
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums_intr: sc=0xc58c2800 status=13
ums_intr: data = 02 00 ff ff 00 00 00 00
ums_intr: status=13
ums0: at uhub8 port 2 (addr 4) disconnected
ums_intr: sc=0xc58c2800 status=6
ums_intr: data = 02 00 ff ff 00 00 00 00
ums0: disconnected
ums0: detached
Dec 23 01:53:12 madcat moused: unable to open /dev/ums0: No such file or
directory
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 4> on uhub8
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: 1918MB (3928064 512 byte sectors: 255H 63S/T 244C)
GEOM_LABEL: Label for provider da1s1 is msdosfs/FAT32_FS.
GEOM_LABEL: Label msdosfs/FAT32_FS removed.
Thanks
-Alastair
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200812230022.46822.agh>