Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 27 Apr 2002 15:45:49 -0700 (PDT)
From:      Lamont Granquist <lamont@scriptkiddie.org>
To:        <freebsd-current@freebsd.org>
Subject:   Uptime of 8909 days on 5-CURRENT
Message-ID:  <20020427154051.N80882-100000@uswest-dsl-142-38.cortland.com>
In-Reply-To: <20020427202901.GA375@lizzy.catnook.com>

next in thread | previous in thread | raw e-mail | index | archive | help

I just did a cvsup today to -current on a GENERIC+SMP kernel and my uptime
is showing 8909 days.  Motherboard is an ASUS A7M266D with the (possibly
buggy) 1004 BIOS.

Here's my dmesg:


  ======================================================================
boot() called on cpu#1
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 9 8 7 6 5 4 3 2 2
done
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Apr 27 15:17:05 PDT 2002
    root@coredump.scriptkiddie.org:/usr/obj/usr/src/sys/COREDUMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc059d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc059d0a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 1600+ (1400.06-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 536788992 (524208K bytes)
avail memory = 515842048 (503752K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f1370
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7M266-D> on motherboard
acpi0: power button is handled as a fixed feature programming model.
acpi0: sleep button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xed800000-0xed800fff irq 10 at device 9.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xed000000-0xed000fff irq 5 at device 9.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib2: <PCI-PCI bridge> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem 0xeb800000-0xeb8fffff,0xec000000-0xec000fff irq 10 at device 6.0 on pci2
fxp0: Ethernet address 00:90:27:bc:09:95
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia, audio> at device 8.0 (no driver attached)
pci2: <input device> at device 8.1 (no driver attached)
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xc0000-0xcc7ff on isa0
fdc0: cannot reserve I/O port range (6 ports)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66
acd0: DVD-ROM <CREATIVEDVD8400E> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST336704LW 0004> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/ad0s1a
SMP: AP CPU #1 Launched!
swi_net: unregistered isr number: 18.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020427154051.N80882-100000>