Date: Sun, 20 Oct 1996 23:16:12 +0100 From: nik@blueberry.co.uk (Nik Clayton) To: questions@freebsd.org Subject: Building a release tape Message-ID: <199610202216.XAA22012@coconut.blueberry.co.uk>
next in thread | raw e-mail | index | archive | help
Could someone (Jordan?) explain how the files on a release tape should be set up? I realise the method is documented in the INSTALL.TXT file, but scanning the questions archive shows the following message on the subject. And there is no followup indicating whether a) Dennis had the right idea, but gave the wrong args to tar b) He did the right thing, something else is causing his SCSI tape installation to fail c) The instructions in INSTALL.TXT are wrong d) Something else. Any advice gratefully received. N > Date: Sun, 28 Jul 1996 14:07:21 -0500 (CDT) > From: "Dennis R. Conley" <conley@eecs.ukans.edu> > Subject: how to make the scsi install tape > > Installation from scsi tape always fails. The drive moves the tape around > from quite awhile, so I assume the failure is due to my having made the > tape incorrectly. From INSTALL.TXT: > [...] > | cd /where/you/have/your/dists > | tar cvf /dev/rwt0 (or /dev/rst0) dist1 .. dist2 > > I assume "dist1", "dist2" are directories, e.g. > > % cd /src/tmp/freebsd/2.1.5-RELEASE > % tar c ./bin ./des ./doc ./src > > Unfortunately, this didn't work. Nor did: > > % cd /src/tmp/freebsd/2.1.5-RELEASE > % cd bin ; tar c . > % cd ../des ; tar r . > % cd ../doc ; tar r . > > > So I'm lost: which "files" are tar'd onto the tape ( or, rather, from which > part of the 2.1.5-RELEASE path is the tar performed )? -- --+=[ Blueberry Hill Blueberry New Media ]=+-- --+=[ http://www.blueberry.co.uk/ 1/9 Chelsea Harbour Design Centre, ]=+-- --+=[ WebMaster@blueberry.co.uk London, England, SW10 0XE ]=+-- --+=[ This isn't much of a .sig, but then, that wasn't much of a message ]ENTP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610202216.XAA22012>