Date: Tue, 28 Jan 2014 11:56:51 +0000 From: Dom F <misc-freebsd@talk2dom.com> To: freebsd-multimedia@freebsd.org Subject: pvr250 - can't select input Message-ID: <52E79B03.6080901@talk2dom.com> In-Reply-To: <52CB252B.8070700@talk2dom.com> References: <mailman.0.1389044520.77595.freebsd-multimedia@freebsd.org> <52CB252B.8070700@talk2dom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I was having problems with a pvr-a-like PCI card so decided to swap it for the "real thing": Hauppauge PVR-250. I've built the multimedia/pvr250 port and the kernel module detects the device: Jan 28 11:47:57 hairball kernel: cxm0: <Conexant iTVC16 MPEG Coder> mem 0xf4000000-0xf7ffffff at device 6.0 on pci1 Jan 28 11:47:57 hairball kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Jan 28 11:47:57 hairball kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Jan 28 11:47:57 hairball kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Jan 28 11:47:57 hairball kernel: cxm0: Temic 4006 FH5 tuner Jan 28 11:47:57 hairball kernel: cxm0: SAA7115 rev 1 video decoder Jan 28 11:47:57 hairball kernel: cxm0: MSP3415G-B8 audio decoder Jan 28 11:47:57 hairball kernel: cxm0: IR Remote Jan 28 11:47:57 hairball kernel: cxm0: [GIANT-LOCKED] Jan 28 11:47:57 hairball kernel: cxm0: encoder firmware version 0x2060039 However I can't get any input to work: [example is S-Video] [root@hairball ~]# kldload cxm [root@hairball ~]# pvr250-setchannel -s ioctl( tfd, METEORSINPUT ) failed.: Invalid argument [root@hairball ~]# Corresponding kernel message is: Jan 28 11:48:05 hairball kernel: cxm0: video decoder failed to lock Is anyone out there using a PVR250 or other Conexant iTVC16 (not 15) -based board and using S-Video or composite input? Suggestions welcome! Thanks, Dominic
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52E79B03.6080901>