Date: Sat, 9 Jun 2001 13:48:16 -0400 From: "Tom Gottheil" <tom@gottheil.com> To: <stable@freebsd.org> Subject: XFree86 Port Problems Message-ID: <000c01c0f10c$5ed17220$0200a8c0@humbaba>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0009_01C0F0EA.D7133E70
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
First of all, let me apologize if this is my second post, my e-mail has been
very screwed up lately. Anyway, for some reason I deinstalled X and
reinstalled it form the updated ports. The reinstall seemed to go fine, but
when it was installing the Mesa libs it exited with this message:
FATAL: Can't create unshared /../X86/common_x86.o: No such file or
directory.
(I have attached dmesg -a if that helps)
------=_NextPart_000_0009_01C0F0EA.D7133E70
Content-Type: application/octet-stream;
name="dmesg"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg"
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-STABLE #2: Sun May 20 13:37:48 EDT 2001=0A=
nelazul@Humbaba:/usr/obj/usr/src/sys/HUMBABA=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) Processor (1008.99-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
real memory =3D 268353536 (262064K bytes)=0A=
config> di pcic0=0A=
No such device: pcic0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di sn0=0A=
No such device: sn0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di lnc0=0A=
No such device: lnc0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di ie0=0A=
No such device: ie0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di fe0=0A=
No such device: fe0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di cs0=0A=
No such device: cs0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di bt0=0A=
No such device: bt0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di aic0=0A=
No such device: aic0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di aha0=0A=
No such device: aha0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> di adv0=0A=
No such device: adv0=0A=
Invalid command or syntax. Type `?' for help.=0A=
config> q=0A=
avail memory =3D 257789952 (251748K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0373000.=0A=
Preloaded userconfig_script "/boot/kernel.conf" at 0xc037309c.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib2: <PCI to PCI bridge (vendor=3D1106 device=3D8305)> at device 1.0 =
on pci0=0A=
pci1: <PCI bus> on pcib2=0A=
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11=0A=
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 =
on pci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device =
4.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device =
4.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2=0A=
uhub2: 4 ports with 4 removable, self powered=0A=
atapci1: <Promise ATA66 controller> port =
0x9000-0x903f,0x9400-0x9403,0x9800-0x9807,0xa000-0xa003,0xa400-0xa407 =
mem 0xd5800000-0xd581ffff irq 5 at device 9.0 on pci0=0A=
ata2: at 0xa400 on atapci1=0A=
ata3: at 0x9800 on atapci1=0A=
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x8800-0x881f irq 10 at =
device 11.0 on pci0=0A=
ed0: address 00:80:c6:f4:34:61, type NE2000 (16 bit) =0A=
pcm0: <Creative EMU10K1> port 0x8400-0x841f irq 5 at device 13.0 on pci0=0A=
atapci2: <Promise ATA100 controller> port =
0x6400-0x643f,0x6800-0x6803,0x7000-0x7007,0x7400-0x7403,0x7800-0x7807 =
mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0=0A=
ata4: at 0x7800 on atapci2=0A=
ata5: at 0x7000 on atapci2=0A=
pcib1: <Host to PCI bridge> on motherboard=0A=
pci2: <PCI bus> on pcib1=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
ppbus0: IEEE1284 device found /NIBBLE=0A=
Probing for PnP devices on ppbus0:=0A=
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ar0: 57259MB <ATA RAID0 array> [7299/255/63] subdisks:=0A=
ad4: 28629MB <QUANTUM FIREBALLP LM30> [58168/16/63] at ata2-master =
UDMA66=0A=
ad6: 29311MB <Maxtor 5T030H3> [59554/16/63] at ata3-master UDMA66=0A=
acd0: CDROM <CD-ROM 50X L> at ata1-master using PIO4=0A=
acd1: CD-RW <6X4X32> at ata1-slave using PIO4=0A=
Mounting root from ufs:/dev/ar0s2a=0A=
swapon: adding /dev/ar0s2b as swap device=0A=
Automatic boot in progress...=0A=
/dev/ar0s2a: =0A=
FILESYSTEM CLEAN; SKIPPING CHECKS=0A=
/dev/ar0s2a: =0A=
clean, 56999 free =0A=
(615 frags, 7048 blocks, 0.6% fragmentation)=0A=
/dev/ar0s2f: =0A=
FILESYSTEM CLEAN; SKIPPING CHECKS=0A=
/dev/ar0s2f: =0A=
clean, 6500068 free =0A=
(39796 frags, 807534 blocks, 0.4% fragmentation)=0A=
/dev/ar0s2e: =0A=
FILESYSTEM CLEAN; SKIPPING CHECKS=0A=
/dev/ar0s2e: =0A=
clean, 11619 free =0A=
(59 frags, 1445 blocks, 0.3% fragmentation)=0A=
Doing initial network setup:=0A=
hostname=0A=
.=0A=
ed0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A=
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255=0A=
ether 00:80:c6:f4:34:61 =0A=
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384=0A=
inet 127.0.0.1 netmask 0xff000000 =0A=
add net default: gateway 192.168.0.1=0A=
Additional routing options:=0A=
tcp extensions=3DNO=0A=
TCP keepalive=3DYES=0A=
.=0A=
Routing daemons:=0A=
.=0A=
Additional daemons:=0A=
syslogd=0A=
.=0A=
Doing additional network setup:=0A=
portmap=0A=
.=0A=
Starting final network daemons:=0A=
.=0A=
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib=0A=
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout =
/usr/X11R6/lib/aout=0A=
Starting standard daemons:=0A=
inetd=0A=
cron=0A=
sshd=0A=
.=0A=
Initial rc.i386 initialization:=0A=
.=0A=
Configuring syscons:=0A=
blank_time=0A=
.=0A=
Additional ABI support:=0A=
.=0A=
Local package initialization:=0A=
[Sat Jun 9 13:02:14 2001] [alert] httpd: Could not determine the =
server's fully qualified domain name, using 192.168.0.2 for ServerName=0A=
=0A=
apache=0A=
cfsd=0A=
rplayd=0A=
Jun 9 13:02:15 Humbaba qmail: 992106135.340486 alert: cannot start: =
unable to read controls=0A=
.=0A=
Additional TCP options:=0A=
.=0A=
=0A=
Sat Jun 9 13:02:15 EDT 2001=0A=
Jun 9 13:09:43 Humbaba su: nelazul to root on /dev/ttyv0=0A=
------=_NextPart_000_0009_01C0F0EA.D7133E70--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c0f10c$5ed17220$0200a8c0>