Date: Fri, 21 Aug 2009 12:31:16 +0200 From: Milan Obuch <freebsd-usb@dino.sk> To: freebsd-usb@freebsd.org Subject: Re: Huawei E169 and microSD Message-ID: <200908211231.17340.freebsd-usb@dino.sk> In-Reply-To: <200908211229.14428.freebsd-usb@dino.sk> References: <200908200915.36134.freebsd-usb@dino.sk> <200908211229.14428.freebsd-usb@dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 21 August 2009 12:29:14 Milan Obuch wrote: > On Thursday 20 August 2009 09:15:35 Milan Obuch wrote: > > Hi, > > > > I tested E169 with both 7.2 and 8.0, with u3g loaded it works well here. > > Download speed 256 kBps is quite good I think. > > > > There is possibility to insert microSD into it and this one does not > > work. > > > > In 7.2, microSD is not even detected (see attached log-e169-72). > > > > In 8.0, microSD is detected, device created (in my case /dev/da1), but > > trying to use it gives > > > > dd if=/dev/da1 > > dd: /dev/da1: Device not configured > > > > error. And it is not a hardware problem, because I was able to initialize > > this card in Windows. > > > > Also, built-in autoinstall flash presented as CD works well. > > > > Some time ago I was able to do some tests with E170. In this case, > > microSD worked out of the box, at that time, tested only with 8.0. > > > > Has anybody any idea, what's wrong here? Something to test? > > > > Regards, > > Milan > > For some reason, list software stripped second attachment... trying here... > > Anybody has any idea why this umass does not function? What could I test? > > Regards, > Milan Strange, no go... inline version: ucom0: <\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^? HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on uhub0 ucom0: Interface 0 of 4, not in use ucom0: Endpoint 0 of 3 ucom0: Endpoint 1 of 3 ucom0: Endpoint 2 of 3 ucom0: port=0 iface=0 in=0x82 out=0x2 ucom0: Interface 1 of 4, not in use ucom0: Endpoint 0 of 2 ucom0: Endpoint 1 of 2 ucom0: port=1 iface=1 in=0x84 out=0x3 ucom0: Interface 2 of 4, not in use ucom0: Endpoint 0 of 2 ucom0: Endpoint 1 of 2 ucom0: port=2 iface=2 in=0x85 out=0x5 ucom0: Interface 3 of 4, not in use ucom0: configured 3 serial ports (U0.%d) ucom0: at uhub0 port 2 (addr 2) disconnected ucom0: detached ucom0: <\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^? HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on uhub0 ucom0: Interface 0 of 4, not in use ucom0: Endpoint 0 of 3 ucom0: Endpoint 1 of 3 ucom0: Endpoint 2 of 3 ucom0: port=0 iface=0 in=0x82 out=0x2 ucom0: Interface 1 of 4, not in use ucom0: Endpoint 0 of 2 ucom0: Endpoint 1 of 2 ucom0: port=1 iface=1 in=0x84 out=0x3 ucom0: Interface 2 of 4, not in use ucom0: Endpoint 0 of 2 ucom0: Endpoint 1 of 2 ucom0: port=2 iface=2 in=0x85 out=0x5 ucom0: Interface 3 of 4, not in use ucom0: configured 3 serial ports (U0.%d) umass0: <\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^? HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on uhub0 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200908211231.17340.freebsd-usb>