Date: Fri, 20 May 2005 21:26:35 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-multimedia@freebsd.org Subject: Re: new gadget - Doro 212IPC usb telephone Message-ID: <20050520212635.6451d187.torfinn.ingolfsen@broadpark.no> In-Reply-To: <20050520150248.GJ10648@cnd.mcgill.ca> References: <20050519231916.78772610.torfinn.ingolfsen@broadpark.no> <20050520150248.GJ10648@cnd.mcgill.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 20 May 2005 11:02:48 -0400 Mathew Kanner <mat@cnd.mcgill.ca> wrote: > But first: How much did it cost? Can you give us the It cost me NOK 350.- which about USD 53.- > descriptor output, use the testlibusb program in libusb port, it's > built but not installed. (If anybody knows an easier way to get the > descriptor please tell me!) I tried the testlibusb program, but get no output??? root@kg-work# pwd /usr/ports/devel/libusb/work/libusb-0.1.10a/tests root@kg-work# ./testlibusb I guess I'm doing something wrong. her's the output from usbdevs -v: root@kg-work# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, Snapscan1212u_2(0x2061), AGFA(0x06bd), rev 1.00 port 2 addr 3: full speed, power 500 mA, config 1, Doro 212IPC(0x1020), ??Welltech Computer(0x0451), rev 47.26 Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered -- Regards, Torfinn Ingolfsen, Norway
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050520212635.6451d187.torfinn.ingolfsen>