Date: Tue, 4 Apr 2006 07:51:42 -0700 From: David Paul Zimmerman <dpz@ack.berkeley.edu> To: Vivek Khera <vivek@khera.org> Cc: FreeBSD AMD list <freebsd-amd64@freebsd.org> Subject: Re: Sun Fire X4100 now booting from LSI1064 SAS Message-ID: <9420324abff5db4117993ab4f327e0e3@ack.berkeley.edu> In-Reply-To: <1B74953F-6F15-4DB7-A80D-FBC5626F08E9@khera.org> References: <8e904fab0b3c4704c1bc045b480b9fce@ack.berkeley.edu> <1B74953F-6F15-4DB7-A80D-FBC5626F08E9@khera.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is what I get after a minimum OS install from the snapshot CD: $ sudo diskinfo -v -t da0s1 da0s1 512 # sectorsize 72999327744 # mediasize in bytes (68G) 142576812 # mediasize in sectors 8874 # Cylinders according to firmware. 255 # Heads according to firmware. 63 # Sectors according to firmware. Seek times: Full stroke: 250 iter in 1.081320 sec = 4.325 msec Half stroke: 250 iter in 1.008685 sec = 4.035 msec Quarter stroke: 500 iter in 2.842515 sec = 5.685 msec Short forward: 400 iter in 1.369284 sec = 3.423 msec Short backward: 400 iter in 1.313750 sec = 3.284 msec Seq outer: 2048 iter in 0.274178 sec = 0.134 msec Seq inner: 2048 iter in 0.277063 sec = 0.135 msec Transfer rates: outside: 102400 kbytes in 1.640884 sec = 62405 kbytes/sec middle: 102400 kbytes in 1.896519 sec = 53994 kbytes/sec inside: 102400 kbytes in 2.723277 sec = 37602 kbytes/sec I'll be doing a csup today to bring it up to date. Here's my current kernel log, if it's interesting to anyone (the virtual CD and floppy errors don't bother me): $ dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT-SNAP013 #0: Fri Mar 10 07:51:58 UTC 2006 root@harrison.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. ACPI APIC Table: <SUN X4100 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 248 (2193.77-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> usable memory = 1062342656 (1013 MB) avail memory = 1023963136 (976 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-35 on motherboard ioapic4 <Version 1.1> irqs 36-39 on motherboard acpi0: <SUN X4100> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x9c00-0x9c3f mem 0xfbfe0000-0xfbffffff irq 26 at device 1.0 on pci1 em0: Ethernet address: 00:14:4f:01:a4:94 em0: [FAST] em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x9800-0x983f mem 0xfbfc0000-0xfbfdffff irq 27 at device 1.1 on pci1 em1: Ethernet address: 00:14:4f:01:a4:95 em1: [FAST] em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x9400-0x943f mem 0xfbfa0000-0xfbfbffff irq 24 at device 2.0 on pci1 em2: Ethernet address: 00:14:4f:01:a4:96 em2: [FAST] em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x9000-0x903f mem 0xfbf80000-0xfbf9ffff irq 25 at device 2.1 on pci1 em3: Ethernet address: 00:14:4f:01:a4:97 em3: [FAST] pci0: <base peripheral, interrupt controller> at device 1.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mpt0: <LSILogic SAS Adapter> port 0xa800-0xa8ff mem 0xfc2fc000-0xfc2fffff,0xfc2e0000-0xfc2effff irq 28 at device 3.0 on pci2 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.9.0 mpt0: Capabilities: ( RAID-0 RAID-1 ) mpt0: 1 Active Volume (2 Max) mpt0: 2 Hidden Drive Members (10 Max) pci0: <base peripheral, interrupt controller> at device 2.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 ohci0: <OHCI (generic) USB controller> mem 0xfe3fe000-0xfe3fefff irq 19 at device 0.0 on pci3 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe3fd000-0xfe3fdfff irq 19 at device 0.1 on pci3 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xfd000000-0xfdffffff,0xfe3ff000-0xfe3fffff irq 16 at device 3.0 on pci3 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 7.2 (no driver attached) pci0: <bridge> at device 7.3 (no driver attached) pcib4: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 1.1 (no driver attached) pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4 pci6: <ACPI PCI bus> on pcib6 pci4: <base peripheral, interrupt controller> at device 2.1 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FAST] acpi_hpet0: <HPET - High Precision Event Timers> iomem 0xfec01000-0xfec013ff irq 0,8 on acpi0 acpi_hpet0: Vendor: 0x1022 acpi_hpet0: Leg_Route_Cap: 1 acpi_hpet0: Count_Size_Cap: 0 acpi_hpet0: Num_Tim_Cap: 8 acpi_hpet0: Rev_id: 0x3 acpi_hpet0: Period: 69841279 fs (14318180 Hz) acpi_hpet0: HPET attach orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000 -0xccfff,0xcd000-0xcdfff,0xce000-0xd27ff,0xd2800-0xd37ff pnpid ORM0000 on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0 kbd0 at ukbd0 ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 1.10/1.00, addr 2> on uhub1 umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 1.10/1.00, addr 3> on uhub1 Timecounter "TSC" frequency 2193768131 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff80603100, 0) error 6 mpt0: mpt_read_cfg_page: Config Info Status 22 mpt0:vol0(mpt0:0:0): mpt_refresh_raid_vol: Failed to read RAID Vol Page(0) mpt0:vol0(mpt0:0:0): Settings ( ) mpt0:vol0(mpt0:0:0): 0 Members: mpt0:vol0(mpt0:0:0): RAID-0 - Optimal (mpt0:0:3): Physical (mpt0:0:3), Pass-thru (mpt0:1:0) (mpt0:0:3): Online (mpt0:0:4): Physical (mpt0:0:4), Pass-thru (mpt0:1:1) (mpt0:0:4): Online acd0: DVDROM <DV-28SL/1.0A> at ata0-master UDMA33 pass1 at mpt0 bus 1 target 0 lun 0 pass1: <FUJITSU MAV2073RCSUN72G 0301> Fixed unknown SCSI-4 device pass1: 300.000MB/s transfers, Tagged Queueing Enabled pass2 at mpt0 bus 1 target 1 lun 0 pass2: <FUJITSU MAV2073RCSUN72G 0301> Fixed unknown SCSI-4 device pass2: 300.000MB/s transfers, Tagged Queueing Enabled da0 at mpt0 bus 0 target 2 lun 0 da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 69618MB (142577664 512 byte sectors: 255H 63S/T 8875C) cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, medium may have changed da1 at umass-sim1 bus 1 target 0 lun 0 da1: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da1:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da1:umass-sim1:1:0:0): Retrying Command (per Sense Data) (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da1:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da1:umass-sim1:1:0:0): Retrying Command (per Sense Data) (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da1:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da1:umass-sim1:1:0:0): Retrying Command (per Sense Data) (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da1:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da1:umass-sim1:1:0:0): Retrying Command (per Sense Data) (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): NOT READY asc:3a,0 (da1:umass-sim1:1:0:0): Medium not present (da1:umass-sim1:1:0:0): Unretryable error Opened disk da1 -> 6 (da1:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): NOT READY asc:3a,0 (da1:umass-sim1:1:0:0): Medium not present (da1:umass-sim1:1:0:0): Unretryable error Opened disk da1 -> 6 Trying to mount root from ufs:/dev/da0s1a em0: link state changed to UP dp On Apr 4, 2006, at 6:37 AM, Vivek Khera wrote: > Awesome! What kind of numbers do you get out of "diskinfo -v -t" in > the RAID1 config? > > On Apr 3, 2006, at 5:23 PM, David Paul Zimmerman wrote: > >> *Many* thanks to mjacob for his mpt driver improvements. I was able >> to boot 7.0-CURRENT-SNAP013-amd64-disc1.iso (3/10/2006 snapshot) from >> CD on my X4100 and install from scratch directly to a SAS disk in >> slot 0. Booted perfectly. Did a csup at ~3/30/2006 15:17, >> buildworld/kernel, installkernel/world, all is still good. >> >> Now I get to go back and do it all again with two drives in a >> hardware RAID 1. Silly metadata. >> >> dp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9420324abff5db4117993ab4f327e0e3>