Date: Mon, 24 Feb 2003 06:01:57 -0500 From: "Paul A. Howes" <freebsd-current@fair-ware.com> To: <freebsd-current@FreeBSD.ORG> Cc: "'John Hay'" <jhay@icomtek.csir.co.za> Subject: RE: cc: Internal error: Illegal instruction (program as) Message-ID: <003c01c2dbf4$27993390$0200a8c0@howesnet> In-Reply-To: <20030222180518.GA29539@zibbi.icomtek.csir.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
All; These two kernel options seem to have solved the problem. Builds now run smoothly and error-free. I read the comments in NOTES about these options and something clicked: I recall that most Pentium processors will only deal with 4 kB pages. Aren't 4 MB pages a feature of the Xeon processor, as it can address much more memory? If that is the case, then these options should be the default, and their inverse provided in the kernel configuration file (ENABLE_PSE & ENABLE_PG_G). -- Paul A. Howes -----Original Message----- From: owner-freebsd-current@FreeBSD.ORG [mailto:owner-freebsd-current@FreeBSD.ORG] On Behalf Of John Hay Sent: Saturday, February 22, 2003 1:05 PM To: Paul A. Howes Cc: freebsd-current@FreeBSD.ORG Subject: Re: cc: Internal error: Illegal instruction (program as) On Sat, Feb 22, 2003 at 11:43:01AM -0500, Paul A. Howes wrote: > All, > > I am receiving some strange errors during a buildworld of 5.0-RELEASE-p2 > from 5.0-RELEASE-p1. The location of where the failure varies, but the > program that causes the failure is the same every time: "as". > > The errors are a variety of signal 10 and signal 4. I do find an > "as.core" file under /usr/obj, but as is stripped, so there are no > debugging symbols or listing that I can provide. > > The strange thing is that I have been able to successfully build > XFree86, KDE, and many other ports on this system. I followed the > 4.x-to-5.0 upgrade directions to the letter about a month ago, and have > had no major problems before this. > > Any help would be greatly appreciated! > > -- > Paul A. Howes > > > ======== > > Hardware > > Tyan S2099GNNR motherboard > Intel P4-2.4/533 > Crucial 512 MB PC2100 DIMM > Maxtor 20 GB hard drive. > > ======== I see it is a P4, try adding options DISABLE_PSE and DISABLE_PG_G to your kernel. My 1.8G P4 do the same without them. John -- John Hay -- John.Hay@icomtek.csir.co.za / jhay@FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003c01c2dbf4$27993390$0200a8c0>