Date: Sat, 03 Jan 2004 06:35:02 -0000 From: Hajimu UMEMOTO <ume@FreeBSD.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: hackers@FreeBSD.org Subject: Re: Power Patches Message-ID: <ygebrpl7d7p.wl%ume@FreeBSD.org> In-Reply-To: <20040102.112311.71086877.imp@bsdimp.com> References: <20040101.233009.58826299.imp@bsdimp.com> <ygead56s2fv.wl%ume@FreeBSD.org> <20040102.112311.71086877.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Multipart_Sat_Jan__3_15:34:02_2004-1
Content-Type: text/plain; charset=US-ASCII
Hi,
>>>>> On Fri, 02 Jan 2004 11:23:11 -0700 (MST)
>>>>> "M. Warner Losh" <imp@bsdimp.com> said:
imp> This looks like it isn't mapping the cis in correctly. Can you turn
imp> on hw.cardbus.debug_cis=1?
I assumed you meant hw.cardbus.cis_debug. ;)
cardbus0: Resource not specified in CIS: id=10, size=8000000
cardbus0: Resource not specified in CIS: id=14, size=20000
cardbus0: Resource not specified in CIS: id=18, size=80
cardbus0: Non-prefetchable memory at 88000000-9001ffff
cardbus0: IO port at 1000-107f
cardbus0: <display, VGA> at device 0.0 (no driver attached)
cbb0: CardBus card activation failed
Full output of dmesg is also attached in this mail.
imp> : imp> 1) You are using hw.pci.unsupported_io=1. Turn it off and use
imp> : imp> these patches. Let me know if it doesn't. Typically it
imp> : imp> appears that this helps people hitting the double
imp> : imp> allocation problem.
imp> :
imp> : I used to set hw.pci.unsupported_io=1. Changing this value doesn't
imp> : help.
imp> Dang. I'd like to get to the bottom of this.
Aha, I made sure to set hw.pci.allow_unsupported_io_range. But, I did
just copy&paste it from your message. :-)
Sincerely,
--Multipart_Sat_Jan__3_15:34:02_2004-1
Content-Type: application/octet-stream
Content-Disposition: attachment; filename="dmesg.out"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Sat Jan 3 01:16:45 JST 2004
root@lyrics.mahoroba.org:/ad0s3/usr/obj/usr/src/sys/LYRICS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ec000.
Preloaded elf module "/boot/kernel/if_an.ko" at 0xc08ec1f4.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08ec2a0.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc08ec34c.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc08ec3f4.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08ec4a0.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc08ec54c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08ec5fc.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc08ec6a8.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08ec750.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc08ec7fc.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc08ec8a8.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc08ec950.
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc08ec9f8.
Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc08ecaa4.
Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc08ecb50.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08ecbfc.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08ecca8.
Preloaded elf module "/boot/kernel/sbp.ko" at 0xc08ecd58.
Preloaded elf module "/boot/kernel/if_fwe.ko" at 0xc08ece00.
Preloaded elf module "/boot/kernel/aout.ko" at 0xc08eceac.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU 800MHz (797.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 369078272 (351 MB)
avail memory = 351404032 (335 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <J1 J1 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00f1530
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0:0:0: setting power state D0
pci0:0:1: setting power state D0
pci0:1:0: setting power state D0
pci0:1:1: setting power state D0
pcib0: slot 1 INTC is routed to irq 5
pci0:1:2: setting power state D0
pcib0: slot 1 INTD is routed to irq 4
pci0:1:3: setting power state D0
pcib0: slot 1 INTD is routed to irq 4
pci0:1:4: setting power state D0
pcib0: slot 1 INTB is routed to irq 7
pci0:1:6: setting power state D0
pcib0: slot 1 INTC is routed to irq 5
pcib0: slot 9 INTA is routed to irq 11
pcib0: slot 9 INTA is routed to irq 11
pci0:9:2: setting power state D0
pcib0: slot 9 INTA is routed to irq 11
pci0:10:0: setting power state D0
pcib0: slot 10 INTA is routed to irq 4
agp0: <SIS Generic host to PCI bridge> mem 0xd4000000-0xd7ffffff at device 0.0 on pci0
agp0: Bus reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd4000000
atapci0: <SiS 630S UDMA100 controller> port 0xd800-0xd80f at device 0.1 on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xd3800000-0xd3800fff irq 5 at device 1.1 on pci0
sis0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xd400
sis0: Ethernet address: 00:80:88:03:48:41
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <SiS 5571 USB controller> mem 0xd3000000-0xd3000fff irq 4 at device 1.2 on pci0
ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xd3000000
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xd2800000-0xd2800fff irq 4 at device 1.3 on pci0
ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2800000
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xd2000000-0xd2000fff irq 7 at device 1.4 on pci0
pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
pcm0: <Analog Devices AD1881A AC97 Codec>
pci0: <simple comms> at device 1.6 (no driver attached)
pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pci0:1:6: setting power state D3
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1:0:0: setting power state D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xde000-0xdefff irq 11 at device 9.0 on pci0
cbb0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xde000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 9.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: bad Vcc request. ctrl=0xf000ef08, status=0xf000e2c3
cbb_power: 0V
pci0: <base peripheral> at device 9.2 (no driver attached)
pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pci0:9:2: setting power state D3
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0800000-0xd0803fff,0xd1000000-0xd10007ff irq 4 at device 10.0 on pci0
fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xd1000000
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:03:03:2a:66
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:03:2a:66
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x6000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 797463916 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc364a560
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s4a
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
IPv6 packet filtering initialized, logging disabled
cardbus0: Resource not specified in CIS: id=10, size=8000000
cardbus0: Resource not specified in CIS: id=14, size=20000
cardbus0: Resource not specified in CIS: id=18, size=80
cardbus0: Non-prefetchable memory at 88000000-9001ffff
cardbus0: IO port at 1000-107f
cardbus0: <display, VGA> at device 0.0 (no driver attached)
cbb0: CardBus card activation failed
--Multipart_Sat_Jan__3_15:34:02_2004-1
Content-Type: text/plain; charset=US-ASCII
--
Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan
ume@mahoroba.org ume@{,jp.}FreeBSD.org
http://www.imasy.org/~ume/
--Multipart_Sat_Jan__3_15:34:02_2004-1--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ygebrpl7d7p.wl%ume>