Date: Mon, 6 May 2013 18:25:43 -0400 From: Super Bisquit <superbisquit@gmail.com> To: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: ISO release of 4/28/2013 for powerpc of ftp1 does not boot Message-ID: <CA%2BWntOvUKY=nwTu3SgzAHdgjLp006tn_7MAyk8c%2B7yDtjFbQ0w@mail.gmail.com> In-Reply-To: <CA%2BWntOvJNL0Mw9in6UcTeycPnLFa%2Bp6viabjtLjVx-pdntibCg@mail.gmail.com> References: <CA%2BWntOs9QfJsFqMd%2Bz2qftLQWA6xXJOKKFWZTE_HhtUL3uhmBg@mail.gmail.com> <CA%2BWntOvJNL0Mw9in6UcTeycPnLFa%2Bp6viabjtLjVx-pdntibCg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm going to see if the 05052013 image will work. On Mon, May 6, 2013 at 3:41 PM, Super Bisquit <superbisquit@gmail.com>wrote: > Is there another image of 10.0 which is known to boot? > Again, because I do not have internet access and it would be a strain on > my back to carry a PowerMAC, and a CRT monitor 3.5 miles in one direction > and bring it back. > > > On Mon, May 6, 2013 at 3:47 AM, Super Bisquit <superbisquit@gmail.com>wrote: > >> I had a mount root error from the image. >> After cd9660:/dev/cd0 using install and shell resulted in the installer >> returning to the install/live/shell curses menu. I was able to mount the cd >> and extracted src.txz to /usr. >> I do not have internet access and must start the process through the >> installation media. Is there a clean image or did I not burn it properly? >> Also, I will need to have the sound as a module and not within the kernel >> after the kernel is rebuilt. What switches do I add or remove from the >> kern.conf file? >> What switches can be used in BSD make to allow some ports to be built >> with clang and others with gcc? >> >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BWntOvUKY=nwTu3SgzAHdgjLp006tn_7MAyk8c%2B7yDtjFbQ0w>