Date: Thu, 21 Sep 2000 23:25:40 +0100 From: Mark Ovens <marko@freebsd.org> To: Antoine Beaupre <beaupran@IRO.UMontreal.CA> Cc: freebsd-questions@freebsd.org Subject: Re: PnP modem not recognized at boot, but by pnpinfo(8) Message-ID: <20000921232540.A257@parish> In-Reply-To: <Pine.LNX.4.21.0009202150110.12634-100000@phobos.IRO.UMontreal.CA>; from beaupran@IRO.UMontreal.CA on Wed, Sep 20, 2000 at 10:19:49PM -0400 References: <20000921013138.G1612@parish> <Pine.LNX.4.21.0009202150110.12634-100000@phobos.IRO.UMontreal.CA>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Sep 20, 2000 at 10:19:49PM -0400, Antoine Beaupre wrote: > Here we go again. > > Yep. Award 4.51PG BIOS. > Close enough, mines a 4.51PGM ('M' for modem maybe :)) > > Anyways, I have some odd results regarding this. I tried to recompile with > sio1 on irq 9, obviouslyy not a good idea since my SCSI adapter is on irq > 9... So I tried to move it back to irq5, but surprise! after a whole new > "config SHALL && cd ../../compile/SHALL && make depend && make && make > install" cycle with the sio1's irq tweaked to 5, at boot, it still gets > listed ('ls' in userconfig (-c)) as irq 9!!! > I'd recommend using ``config -r'' when you've changed things. It removes the compile directory and re-creates it which guarantees that everything is correct (some files are created by the build process containing specific data from the config file - these don't get updated just because something is changed or deleted from the config, only if something is added). [snip] > > Aha! a classic case of IRQ conflicts. > > Or so I've been told. But with what? The sio1? It seems so. But then, the > kernel should switch the modem to another irq! I can't move it away from > irq3, whatever I try! (get ready for the classical "Windoze can do > it!?") On windos, it's on irq 10 and port 0x3e8 - 0x3fe. Shouldn't the > fbsd kernel be able to do the same acrobatics? > I must have missed that in an earlier post, I'd been assuming that Win was using IRQ3. OK, maybe this won't directly solve your problem but it may give you some ideas to try, I reboot my PC into all 3 OS's and looked for the modem settings: FreeBSD - IRQ5 0x3e8 sio2 (COM3 in DOS) Win 95 - IRQ5 0x3e8 COM3 Win NT4 - IRQ5 0x2e8 COM4 (note the different address in NT) My BIOS is setup thus: PnP OS: N Resources controlled by: Manual Reset configuration Data: Disabled IRQ-3 Legacy ISA IRQ-4 Legacy ISA IRQ-5 PCI/ISA PnP IRQ-7 Legacy ISA IRQ-9 PCI/ISA PnP IRQ-10 PCI/ISA PnP IRQ-11 PCI/ISA PnP IRQ-12 Legacy ISA IRQ-14 PCI/ISA PnP IRQ-15 PCI/ISA PnP OK, I've done some tests on my system. Normally this is what I get: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A .... sio2: <Pace 56 Voice Internal Plug & Play Modem> at port 0x3e8-0x3ef irq 5 on isa0 sio2: type 16550A I disabled sio1 (COM2) in the BIOS and got: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ..... sio2: <Pace 56 Voice Internal Plug & Play Modem> at port 0x2f8-0x2ff irq 3 on isa0 sio2: type 16550A I got the same error about sio1 that you did but notice that my modem, although it is still found at sio2, now has the IRQ and address that sio1 usually has (IRQ3 0x2f8). Next, I did ``boot -c'' and disabled sio1, this time I got: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A .... sio2: <Pace 56 Voice Internal Plug & Play Modem> at port 0x2f8-0x2ff irq 3 on isa0 sio2: type 16550A No warning about sio1, the modem still found as sio2, and still with IRQ3 0x2f8 (sio1's usual settings). So, why don't you try, disabling sio1 (COM2) in the BIOS, doing ``boot -c'', disabling sio1, and see what happens to your modem. -- 4.4 - The number of the Beastie ________________________________________________________________ 51.44°N FreeBSD - The Power To Serve http://www.freebsd.org 2.057°W My Webpage http://ukug.uk.freebsd.org/~mark mailto:marko@freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000921232540.A257>