Date: Thu, 21 Jun 2007 13:18:44 -0400 From: "Sateesh Mandava" <Sateesh.Mandava@infotechfl.com> To: <freebsd-current@freebsd.org> Subject: RE: AGPGART not found ... ( on Q965) Message-ID: <002e01c7b428$38ab9950$d70014ac@sateeshm> In-Reply-To: <op.tt9aooch0g54sc@localhost> References: <op.tt9aooch0g54sc@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
This doesn't work in my case :( I get the same error after reboot. -----Original Message----- From: V.Chukharev [mailto:chukharev@mail.ru] Sent: Thursday, June 21, 2007 1:26 AM To: Sateesh Mandava Cc: freebsd-current@freebsd.org Subject: Re: AGPGART not found ... ( on Q965) Hi, I had similar problem. I deleted 'device agp' from the kernel config, commented out 'acpi_video_load="YES"' from /boot/loader.conf, and added 'agp_load="YES"' to it. After reboot with the new kernel /dev/agpgart was found. I did not try to find minimal change needed on my 6-STABLE. Try if this helps to your CURRENT too. -- V. Chukharev You wrote: ==================== Hi, I am trying to get the i810/intel drivers work with xorg 7.2. X server is failing with /dev/agpgart missing error. Can somebody help me on how to fix this error? Below are more details about the problem. $uname -r 7.0-CURRENT-200703 $lspci -lv .... vgapci0@pci0:2:0: class=0x030000 card=0x5058107b chip=0x29928086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Q963/Q965 Integrated Graphics Controller' class = display subclass = VGA vgapci1@pci0:2:1: class=0x038000 card=0x5058107b chip=0x29938086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Q963/Q965 Integrated Graphics Controller' class = display .... $more /etc/X11/xorg.conf ... Section "Device" Identifier "Card0" Driver "i810" VendorName "Intel Corporation" BoardName "Unknown Board" BusID "PCI:0:2:0" VideoRam 262144 EndSection ... $ more /var/log/Xorg.0.log .... (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) (WW) intel(0): /dev/agpgart is either not available, or no memory is available for allocation. Using pre-allocated memory only. (**) intel(0): VideoRam: 7676 KB .... (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? ... Thanks, Sateesh.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002e01c7b428$38ab9950$d70014ac>