Date: Sat, 7 Aug 1999 20:28:02 +0100 From: "Duncan Spooner" <duncanks@altavista.net> To: <freebsd-hardware@FreeBSD.org> Subject: Parallel Zip Drive on FreeBSD 3.2-RELEASE Message-ID: <003b01bee10b$07297580$0100a8c0@duncan>
next in thread | raw e-mail | index | archive | help
I have a parallel port Iomega Zip Drive. I have installed 3.2-RELEASE and
although the vpo0 is detected it does not see da0, and when I try "mount -t
msdos /dev/da0s4 /mnt" it gives me the error message "msdos: /dev/da0s4:
Device not configured".
I have added scbus0 and da0 to the kernel as well.
Below is a copy of the dmesg from the most recent boot.
If wanted I can post the kernel configuration file as well.
Many Thanks.
---- Start of dmesg.today file ----
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #6: Fri Aug 6 14:22:48 BST 1999
duncan@freebsd.duncanspooner.co.uk:/usr/src/sys/compile/FREEBSD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (133.12-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 13840384 (13516K bytes)
Preloaded elf kernel "kernel" at 0xc02bd000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C585 (Apollo VP1/VPX) system controller> rev 0x23 on pci0.0.0
chip1: <VIA 82C586 PCI-ISA bridge> rev 0x25 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
pci0.7.1
vga0: <Cirrus Logic GD5446 SVGA controller> rev 0x00 on pci0.8.0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on pci0.10.0
ed1: address 00:e0:29:2b:16:06, type NE2000 (16 bit)
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL540A>
wd0: 519MB (1064448 sectors), 1056 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <ATAPI CDROM/V1.80>, removable, dma, iordy
acd0: drive speed 4153KB/sec, 120KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 15 seconds for SCSI devices to settle
changing root device to wd0s1a
---- End of dmesg.today file ----
-- Duncan
duncanks@altavista.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003b01bee10b$07297580$0100a8c0>