Date: Sat, 22 Jun 1996 16:16:01 -0500 (CDT) From: Bob Willcox <bob@luke.pmr.com> To: freebsd-current@freefall.FreeBSD.org (freebsd-current) Subject: Problem w/dump & Archive (Conner) Python tape drives Message-ID: <199606222116.QAA18967@luke.pmr.com>
next in thread | raw e-mail | index | archive | help
I am having problems trying to run dump to either of my Archive Python DAT tape drives (one is an autoloader, the other not). Right at the time dump claims to be dumping the directories dump goes into an infinite wait. If I cancel (via Cntl-C) the dump command the system will eventually require rebooting do to (false?) errors on the disk drive (which is on a different NCR 810 SCSI controller). I have tried this with both of my tape drives and with both an NCR 810 adapter and an Adaptec 2940 adapter with the same results. Writing to/reading from the drives with tar and/or team works fine. The system is a 166MHz Pentium with a Triton 2 MB running -current (as of 6/20). Is anybody out there able to get dump to work with these tape drives (mine are both DDS-2 [4/8gb] drives)? Thanks, -- Bob Willcox bob@luke.pmr.com Austin, TX
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606222116.QAA18967>