Date: Fri, 15 Mar 1996 19:49:37 -1000 From: Andrew Foster <adf@fl.net.au> To: hackers@freebsd.org Subject: Locks. Message-ID: <2.2.32.19960316054937.00af3a00@mail.fl.net.au>
next in thread | raw e-mail | index | archive | help
Hi,
I'm quite desperate for help on this machine now :
It's a :
Pentium 90
Gigabyte Triton motherboard
32MB RAM
4GB Seagate Hawk
1GB IBM SCSI
1GB Quantum SCSI
1.2GB Maxtor EIDE
NCR SCSI Controller
256k Trident ISA video card
ISA NE2000 card.
This machine will either randomly reboot or lock up. When it locks I can
switch vty's but not login (no password comes up), I can open some ports
that inetd isn't control of, but I can't telnet in or anything.
I've replaced :
CPU, Motherboard twice, Memory twice. Some of the drives have been added
during the time that's I've had problems.
All motherboards have been Triton based (inc. ASUSTek). I'm beginning to
wonder if it's the NE2000 because 2 other FreeBSD machines I had also locked
up like this sometimes, and both had NE2000's. However, I've since used
them less (lower loads) and they're working fine.
This has happened in -release, -960303-SNAP and now in -stable.
I have patched the system correctly.
Could anyone please suggest what I could do to fix this.
Here is my dmesg :
FreeBSD 2.1-STABLE #1: Thu Mar 14 21:32:50 1996
root@cafu.fl.net.au:/usr/src/stable/sys/compile/IMP
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping=4
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30715904 (29996K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:10
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "QUANTUM FIREBALL1080S 1Q08" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1042MB (2134305 512 byte sectors)
(ncr0:1:0): "SEAGATE ST15230N 0298" type 0 fixed SCSI 2
sd1(ncr0:1:0): Direct-Access
sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
4095MB (8386733 512 byte sectors)
(ncr0:2:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2
sd2(ncr0:2:0): Direct-Access
sd2(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1034MB (2118144 512 byte sectors)
(ncr0:4:0): "WANGTEK 6130-HS 4W17" type 1 removable SCSI 2
st0(ncr0:4:0): Sequential-Access
st0(ncr0:4:0): 275ns (4 Mb/sec) offset 8.
density code 0x13, 1024-byte blocks, write-enabled
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 at 0x300-0x31f irq 5 on isa
ed1: address 00:00:01:06:49:18, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 71260 AP>
wd0: 1204MB (2467584 sectors), 2448 cyls, 16 heads, 63 S/T, 512 B/S
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
WARNING: / was not properly dismounted.
Thanks,
Andrew Foster
-----------
Andrew Foster
Sydney, Australia
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19960316054937.00af3a00>