Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Jul 2004 11:29:22 -0700
From:      "Kevin Oberman" <oberman@es.net>
To:        peter@sandilands.vu
Cc:        FreeBSD Mobile Mailing List <freebsd-mobile@freebsd.org>
Subject:   Re: Thinkpad 600E and 5.2 
Message-ID:  <20040729182922.470275D08@ptavv.es.net>
In-Reply-To: Your message of "Thu, 29 Jul 2004 10:34:30 %2B1000." <IOEHIPOKAPPDDMNJNKKGKEOKCFAA.peter@sandilands.vu> 

next in thread | previous in thread | raw e-mail | index | archive | help
> From: "Peter Sandilands" <peter@sandilands.vu>
> Date: Thu, 29 Jul 2004 10:34:30 +1000
> 
> 
> 
> > -----Original Message-----
> > From: Kevin Oberman [mailto:oberman@es.net]
> > Sent: Thursday, July 29, 2004 10:24 AM
> > To: peter@sandilands.vu
> > Cc: Gary Kline; Victor Bratsev; FreeBSD Mobile Mailing List
> > Subject: Re: Thinkpad 600E and 5.2
> >
> >
> > > From: "Peter Sandilands" <peter@sandilands.vu>
> > > Date: Thu, 29 Jul 2004 10:15:16 +1000
> > > Sender: owner-freebsd-mobile@freebsd.org
> > >
> > > I just dug out a TP600E, installed 4.10........
> > >
> > > Xircom RE100 - works fine (16 bit card)
> > > Xircom RealPort Cardbus Ethernet 10/100-Modem 56 - no go,
> >  expected as
> > > no cardbus support in 4.x
> > > D-Link DFE650 - works fine
> > > 3Com Megahertz 3CCFE574BT - works fine
> > >
> > > The "E" is a 2645-5JA
> > >
> > > Just FYI these also work in a TP600, TP600X
> > >
> > > If I use 5.x I need to run OLDCARD but the above cards
> > work there also
> >
> > This surprises me a bit. I have not booted V5 on my 600E for about a
> > year, but I was running NEWCARD on it at that time. Has something
> > broken?
> >
> > I do belive that I did have to add a sysctl to make NEWCARD work,
> > though, but it supported my CardBus 10/100 Xircom card.
> 
> I'd be very interested in what the sysctl change was.
> I've tried 5.1, 5.2, 5.21 and none of them work out of the box with my
> cards and my TPs (yeah I own a collection :-) ).
> So I've always just fallen back to using OLDCARD.  But I'd like to
> switch to NEWCARD.
> 
> Maybe I should do some digging??

I just fired up my 600E. It's running 5.2-BETA from Dec. of last year.
Something my have broken since then, but I get NEWCARD to work with the
following in /boot/loader.conf: hw.cbb.start_memory="0x20000000"
hw.pci.allow_unsupported_io_range="1"

My kernel config is:
device	  cbb
device	  pccard
device	  cardbus

It was not happy with ACPI, so I am running APM.

My Xircom card seems quite happy there.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040729182922.470275D08>