Date: Sun, 26 Jul 2009 14:55:42 +0200 From: Marc Fonvieille <blackend@FreeBSD.org> To: freebsd-usb@FreeBSD.org Subject: SANE, USB image scanner and -CURRENT Message-ID: <20090726125542.GA40587@abigail.blackend.org>
next in thread | raw e-mail | index | archive | help
Hello, I'm trying to make run a scanner using the USB interface under 8.0-BETA2 with graphics/sane-backends and graphics/sane-frontends but SANE is unable to detect the scanner. When I plug the scanner dmesg gives: ugen2.2: <Canon> at usbus2 'usbconfig dump_device_desc' gives ugen2.2: <CanoScan Canon> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x00ff bDeviceSubClass = 0x0000 bDeviceProtocol = 0x00ff bMaxPacketSize0 = 0x0008 idVendor = 0x04a9 idProduct = 0x220e bcdDevice = 0x0100 iManufacturer = 0x0001 <Canon> iProduct = 0x0002 <CanoScan> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Both 'sane-find-scanner -q' and 'scanimage -L' are unable to find any scanner. So I tried to inform SANE via /usr/local/etc/sane.d/plustek.conf (the right config file for my scanner) that the scanner was [usb] 0x04a9 0x220e or (2nd try) [usb] 0x04a9 0x220e device /dev/ugen2.2 or (3rd try) [usb] device /dev/ugen2.2 but both 'sane-find-scanner -q' and 'scanimage -L' still gives nothing. Then I read the CVS logs about SANE's ports and http://www.freebsd.org/cgi/cvsweb.cgi/ports/graphics/sane-backends/Makefile seems to say that SANE is broken since removal of uscanner(8), am I right? -- Marc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090726125542.GA40587>