Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Feb 2010 17:40:46 -0500
From:      John Baldwin <jhb@freebsd.org>
To:        Brandon Gooch <jamesbrandongooch@gmail.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: ZFS boot problems with memory > 1MB
Message-ID:  <201002231740.46478.jhb@freebsd.org>
In-Reply-To: <179b97fb1002231404x1b5fce88v1d76450cc70473a1@mail.gmail.com>
References:  <747dc8f31002220835g481b0baeqb1d6df32a79b7da2@mail.gmail.com> <201002231603.36500.jhb@freebsd.org> <179b97fb1002231404x1b5fce88v1d76450cc70473a1@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 23 February 2010 5:04:03 pm Brandon Gooch wrote:
> On Tue, Feb 23, 2010 at 3:03 PM, John Baldwin <jhb@freebsd.org> wrote:
> > On Tuesday 23 February 2010 3:36:19 pm Brandon Gooch wrote:
> >> On Tue, Feb 23, 2010 at 1:01 PM, John Baldwin <jhb@freebsd.org> wrote:
> >> > On Tuesday 23 February 2010 12:36:31 pm Brandon Gooch wrote:
> >> >> On Tue, Feb 23, 2010 at 10:24 AM, John Baldwin <jhb@freebsd.org> 
wrote:
> >> >> > On Tuesday 23 February 2010 10:28:49 am Brandon Gooch wrote:
> >> >> >> On Tue, Feb 23, 2010 at 7:29 AM, Andriy Gapon <avg@icyb.net.ua> 
wrote:
> >> >> >> > on 23/02/2010 13:18 Renato Botelho said the following:
> >> >> >> >> On Mon, Feb 22, 2010 at 7:35 PM, Chris Hedley
> >> >> >> >> <freebsd-current@chrishedley.com> wrote:
> >> >> >> > [snip]
> >> >> >> >>> Do you have USB legacy support enabled in your BIOS?  I'm not 
sure
> > if
> >> >> >> >>> there's an option for the loader to use USB devices natively, 
but
> > the BIOS's
> >> >> >> >>> legacy option where it provides AT/PS2 emulation is probably 
the
> > easiest way
> >> >> >> >>> to get the keyboard working.
> >> >> >> >>
> >> >> >> >> Yes, I do, but it seems to be a regression on FreeBSD itself, I 
had
> > this problem
> >> >> >> >> in the past and I checked the same things i need to check in the
> > past again and
> >> >> >> >> everything is fine.
> >> >> >> >
> >> >> >> > A more precise way to state that would be "a regression in 
FreeBSD
> > boot/loader".
> >> >> >> > I think that you are referring to the issue that was fixed by
> > r189017.
> >> >> >> > It might be worthwhile investigating what was done in that 
revision
> > and what
> >> >> >> > happened in sys/boot code since then.
> >> >> >> >
> >> >> >> > One possibility is that your BIOS uses memory above 1MB for USB
> > emulation, but
> >> >> >> > doesn't mark that memory as used in system memory map.  In that 
case
> > that memory
> >> >> >> > could be overwritten by the loader.  If that's true then the 
blame
> > is on the BIOS.
> >> >> >> >  Alternatively, our code might be parsing the system memory map
> > incorrectly.
> >> >> >> > But I am just making wild guesses here.
> >> >> >> >
> >> >> >>
> >> >> >> I don't know if it is at all related, but this commit has caused
> >> >> >> problems for me booting at least one of my machines:
> >> >> >>
> >> >> >>
> > 
http://svn.freebsd.org/viewvc/base/head/sys/boot/i386/zfsboot/zfsboot.c?r1=199714&r2=200309
> >> >> >>
> >> >> >> Commit message:
> >> >> >>
> >> >> >> Revision 200309 - (view) (annotate) - [select for diffs]
> >> >> >> Modified Wed Dec 9 20:36:56 2009 UTC (2 months, 2 weeks ago) by jhb
> >> >> >> File length: 24893 byte(s)
> >> >> >> Diff to previous 199714
> >> >> >> - Port bios_getmem() from libi386 to {gpt,}zfsboot() and use it to
> >> >> >>   safely allocate a heap region above 1MB.  This enables
> > {gpt,}zfsboot()
> >> >> >>   to allocate much larger buffers than before.
> >> >> >> - Use a larger buffer (1MB instead of 128K) for temporary ZFS 
buffers.
> >  This
> >> >> >>   allows more reliable reading of compressed files in a 
raidz/raidz2
> > pool.
> >> >> >>
> >> >> >> Submitted by: Matt Reimer  mattjreimer of gmail
> >> >> >> MFC after:    1 week
> >> >> >
> >> >> > Starting a new thread, which problems are you seeing with this 
change?
> >  ZFS is
> >> >> > a good bit more memory hungry than UFS, so it really needs to use 
high
> > memory
> >> >> > for its heap.  Also, I wonder if you still have problems if you use 
the
> > older
> >> >> > zfsboot with the newer zfsloader?  Finally, you need to use 
disklabel -
> > B or
> >> >> > some such to update the zfsboot bits for this change to take effect.
> >> >> >
> >> >> > --
> >> >> > John Baldwin
> >> >> >
> >> >>
> >> >> I filed a PR so it wouldn't fall through the cracks:
> >> >>
> >> >> http://www.freebsd.org/cgi/query-pr.cgi?pr=144234
> >> >>
> >> >> I guess I tried a combination of various revisions of bootstrap code
> >> >> and loaders when I first encountered the issue. It was when I wrote a
> >> >> recent gptzfsboot to the geom that I saw the symptoms:
> >> >>
> >> >> error 1 lba 48
> >> >> error 1 lba 1
> >> >> No ZFS pools located, can't boot
> >> >>
> >> >> I just wound up using sys/boot/i386/zfsboot/zfsboot.c revision 199714
> >> >> to build a working gptzfsboot on another system and wrote that to the
> >> >> disk to get the machine operational.
> >> >
> >> > Try this:
> >> >
> >> > Index: zfsboot.c
> >> > ===================================================================
> >> > --- zfsboot.c   (revision 204207)
> >> > +++ zfsboot.c   (working copy)
> >> > @@ -467,6 +467,7 @@
> >> >  static inline void
> >> >  putc(int c)
> >> >  {
> >> > +    v86.ctl = 0;
> >> >     v86.addr = 0x10;
> >> >     v86.eax = 0xe00 | (c & 0xff);
> >> >     v86.ebx = 0x7;
> >> > @@ -617,6 +618,8 @@
> >> >     off_t off;
> >> >     struct dsk *dsk;
> >> >
> >> > +    dmadat = (void *)(roundup2(__base + (int32_t)&_end, 0x10000) -
> > __base);
> >> > +
> >> >     bios_getmem();
> >> >
> >> >     if (high_heap_size > 0) {
> >> > @@ -627,9 +630,6 @@
> >> >        heap_end = (char *) PTOV(bios_basemem);
> >> >     }
> >> >
> >> > -    dmadat = (void *)(roundup2(__base + (int32_t)&_end, 0x10000) -
> > __base);
> >> > -    v86.ctl = V86_FLAGS;
> >> > -
> >> >     dsk = malloc(sizeof(struct dsk));
> >> >     dsk->drive = *(uint8_t *)PTOV(ARGS);
> >> >     dsk->type = dsk->drive & DRV_HARD ? TYPE_AD : TYPE_FD;
> >> > @@ -1157,6 +1157,7 @@
> >> >      * when no such key is pressed in reality. As far as I can tell,
> >> >      * this only happens shortly after a reboot.
> >> >      */
> >> > +    v86.ctl = V86_FLAGS;
> >> >     v86.addr = 0x16;
> >> >     v86.eax = fn << 8;
> >> >     v86int();
> >> >
> >> > --
> >> > John Baldwin
> >> >
> >>
> >> It still breaks:
> >>
> >> error 1 lba 48
> >> error 1 lba 1
> >> No ZFS pools located, can't boot
> >
> > Ok.  Can you add a printf to zfsboot.c to print out dsk->start in the case
> > that you get an error?  error 1 means that the BIOS thinks it got a bad
> > parameter, presumably in the disk packet.  If you wanted to be ambitious, 
just
> > print out all of the fields in the packet when it fails.
> >
> > --
> > John Baldwin
> >
> 
> Adding printf statements to drvread():
> 
> printf("dsk->xxx: %u\n", dsk->xxx):
> 
> Output:
> 
> error 1 lba 48
> dsk->drive: 0
> dsk->type: 0
> dsk->unit: 0
> dsk->slice: 0
> dsk->part: 0
> dsk->init: 0
> dsk->start: 978673664

This value looks a bit high, do you have a partition that starts at an offset 
of about 466GB into the disk?

> error 1 lba 1
> dsk->drive: 0
> dsk->type: 0
> dsk->unit: 0
> dsk->slice: 0
> dsk->part: 0
> dsk->init: 0
> dsk->start: 0
> No ZFS pools located, can't boot

Sorry, I meant members of the 'packet' variable, though dsk->start is useful 
to have as well.  

-- 
John Baldwin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201002231740.46478.jhb>