Date: Sat, 29 Nov 2014 10:52:10 +0800 From: Erich Dollansky <erichsfreebsdlist@alogt.com> To: Eric Gunther <egunther@warwick.net> Cc: freebsd-arm@freebsd.org Subject: Re: Raspberry Pi composite video problem Message-ID: <20141129105210.5a72a8ec@X220.alogt.com> In-Reply-To: <1417229109.1835.2.camel@warwick.net> References: <1417167767.23507.2.camel@warwick.net> <1417193156.3202.1.camel@warwick.net> <20141129084900.10050d11@X220.alogt.com> <1417229109.1835.2.camel@warwick.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On Fri, 28 Nov 2014 21:45:09 -0500 Eric Gunther <egunther@warwick.net> wrote: > On Sat, 2014-11-29 at 08:49 +0800, Erich Dollansky wrote: > > > On Fri, 28 Nov 2014 11:45:56 -0500 > > Eric Gunther <egunther@warwick.net> wrote: > > . > > > > > > Eureka, I have logged in via ssh. Not sure what is different > > > although the last few things I did where: > > > > > > rechecked /etc/inetd.conf, /etc/rc.conf, /etc/services > > > > > > service sshd enable > > > service sshd reload > > > > > > And plugged in the client computer after the RPi had been > > > connected to the ethernet, worked using IP. > > > > > sshd can run without inetd. > > Thanks for telling me. Funny thing, it stopped working afterward and > cannot get it working again (ssh). Getting ssh working was, in a way, > beside the point. I would like to figure out how to fix the display > issue. If I had a working Ethernet connection to the Pi I could; > Download the firmware and put it on, Adjust configuration files > easier, and Report dmesg or similar message output to the list as > needed. > just put this into your rc.conf: inetd_enable="YES" inetd_flags="-wW -a whateveraddress" and this ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4 ssh stream tcp6 nowait root /usr/sbin/sshd sshd -i -6 telnet stream tcp nowait root /usr/libexec/telnetd telnetd telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd into your inetd.conf. If all other things fail, you should be able to transfer files via ftp then. > I emphasize that this is to more quickly and efficiently fix > the display. I realize that you mentioned that you are not able to > help with the composite video. So no thoughts on whether the > firmware would help that problem? That is, text off the screen. > I have the B+ only. The 10.1 firmware should be able to handle the older model without a problem. Erich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141129105210.5a72a8ec>