Date: Tue, 06 May 2003 10:07:03 -0700 From: "Jin Guojun [NCS]" <j_guojun@lbl.gov> To: joe mcguckin <joe@via.net> Cc: hardware@freebsd.org Subject: Re: Intel GigE and copper PHY supported? Message-ID: <3EB7EBB6.3038C32E@lbl.gov> References: <BADD2D59.2C6B6%joe@via.net>
next in thread | previous in thread | raw e-mail | index | archive | help
joe mcguckin wrote: > I'd like to use the TYAN Trinity GC-SL motherboard with on-board GigE > (copper). Does anyone know if this is supported? Has anyone used this board > with 4.X? > > Thanks, Do not have direct use of this motherboard. We have some similar M/Bs from SuperMicro (same chipset and same GigE NICs). General M/B performance is good. The GigE is not too pleasure. The Incoming TCP is about 350 Mb/s, and out going TCP is only 270, which is limited by interrupt (98% CPU -- 2.8 GHz -- used for interrupt). Either the driver or the Intel NIC is not functioning properly, but we do not have time to investigate. -Jin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3EB7EBB6.3038C32E>