Date: Sat, 30 Jul 2011 00:01:50 +0100 From: Michael <mlmichael70@gmail.com> To: freebsd-questions@freebsd.org Subject: Arduino UNO - upload not working Message-ID: <4E333BDE.4010705@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello, Can anybody confirm that Arduino UNO is working fine with FreeBSD? I'm having problems with uploading my sketches. Arduino IDE says: Binary sketch size: 3620 bytes (of a 32256 byte maximum) avrdude: stk500_getsync(): not in sync: resp=0x00 And it doesn't upload anything. Uploading on Windows works fine. Also once the sketch is uploaded on Windows then I can receive data on FreeBSD via Serial Monitor. It's just Upload that doesn't work. It's recognized by my system as: ugen0.2: <Arduino (www.arduino.cc)> at usbus0 umodem2: <Arduino (www.arduino.cc) Arduino Uno, class 2/0, rev 1.10/0.01, addr 2 > on usbus0 umodem2: data interface 1, has CM over data, has break Also sysctl says: dev.umodem.2.%desc: Arduino (www.arduino.cc) Arduino Uno, class 2/0, rev 1.10/0.01, addr 3 I'm running FreeBSD 8.2-RELEASE-p2 with Arduino 0022 (with a patch to resolve the readlink problems). I'm using uarduno kernel module (tried both versions 1.00 and 1.02a) and avrdude (tried both vanilla ports and with a www.mrp3.com/uarduno.html patch). Run out of ideas and switching back to Windows kills my productivity (and fun!). If it works for you then at least please let me know that it's doable. Thank you, Michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E333BDE.4010705>