Date: Wed, 23 Dec 2009 10:11:11 +0100 From: "Lhunath (Maarten B.)" <lhunath@gmail.com> To: freebsd-net@freebsd.org Subject: mskc0: Tx descriptor error Message-ID: <C7B75D6E-7FA4-4EB2-B242-BABF0E1877DF@gmail.com>
next in thread | raw e-mail | index | archive | help
Hey, I'm having problems getting my Marvell Yukon to work. I can = successfully get it set up using DHCP, but when I start using it, I get = error messages such as: "mskc0: Tx descriptor error" and "msk0: watchdog = timeout". This is using the msk(4) module from 8.0-RELEASE. A bit of googling indicates that this problem is not uncommon, but had = each time been resolved by patches that appear to have already been = applied to the msk module that I'm using. Some help would be appreciated. Here is the ''dmesg'' output with = bootverbose on and a ''vmstat -i'' should it matter. =46rom dmesg: mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xe800-0xe8ff mem = 0xfebfc000-0xfebfffff irq 17 at device 0.0 on pci4 pcib4: mskc0 requested memory range 0xfebfc000-0xfebfffff: good mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 58 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 0KB msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on = mskc0 msk0: bpf attached msk0: Ethernet address: 00:1f:c6:83:a7:d0 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-FDX, auto mskc0: [MPSAFE] mskc0: [FILTER] pci5: driver added pci6: driver added msk0: link state changed to DOWN msk0: link state changed to UP mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error mskc0: Tx descriptor error msk0: watchdog timeout msk0: link state changed to DOWN msk0: link state changed to UP =46rom vmstat -i: interrupt total rate irq14: ata0 246 0 irq17: fwohci0 2 0 irq20: ohci1 1 0 irq21: ehci1 9412 0 irq22: ohci0 5379 0 irq23: ehci0+ 11296 1 cpu0: timer 18926028 1999 irq256: mskc0 377 0 Total 18952741 2002
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C7B75D6E-7FA4-4EB2-B242-BABF0E1877DF>