Date: Thu, 1 Aug 2013 23:34:48 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: =?ISO-8859-1?Q?Roger_Pau_Monn=E9?= <roger.pau@entel.upc.edu> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Cubieboard2 and FreeBSD Message-ID: <CAGtf9xNO5ZpRsGj420QXgmayRwDYrc%2BqT5tFUCqJ1YrgeZAK6w@mail.gmail.com> In-Reply-To: <CAPLaKK6ro_DL60eviUPx3Ymi0hEwq_fBRvk5npMvgJUdt8n86Q@mail.gmail.com> References: <CAPLaKK6ro_DL60eviUPx3Ymi0hEwq_fBRvk5npMvgJUdt8n86Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On Thu, Aug 1, 2013 at 11:14 PM, Roger Pau Monn=E9 <roger.pau@entel.upc.edu= >wrote: > Hello, > > I saw your email on freebsd-arm mailing lists and I was wondering if > you could share how did you manage to get FreeBSD running on it. I > also have one of this boards, but I'm not really familiar with the arm > world so I'm a little bit lost about were to start (without using a > pre-made img). > For now you can follow instructions at https://wiki.freebsd.org/FreeBSD/arm/Cubieboard to build kernel and image for cubieboard2. Replace CUBIEBOARD to CUBIEBOARD2 there. You should use sunxi-spl.bin and u-boot.bin different from cubieboard, you can get them from http://androtab.info/cubieboard2/ For necessary A20 src, copy https://github.com/tsgan/allwinner_a10/tree/master/a20 files to appropriate places: CUBIEBOARD2 to /usr/src/sys/arm/conf/, cubieboard2.dts to /usr/src/sys/boot/fdt/dts/, rest of files (except dmesg.txt) to /usr/src/sys/arm/allwinner/a20/ You have to have src tree in order to build kernel and image. hth, Ganbold > > Thanks, Roger. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xNO5ZpRsGj420QXgmayRwDYrc%2BqT5tFUCqJ1YrgeZAK6w>