Date: Wed, 14 Jan 1998 14:38:12 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Fernando Schapachnik <fpscha@ns1.sminter.com.ar> Cc: questions@FreeBSD.ORG Subject: Re: Problem adding a hard disk Message-ID: <Pine.BSF.3.96.980114143609.27200E-100000@gdi.uoregon.edu> In-Reply-To: <199801140553.IAA29015@ns1.sminter.com.ar>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 14 Jan 1998, Fernando Schapachnik wrote: > > > (ahc0:1:0): "SEAGATE ST34371W 0484" type 0 fixed SCSI 2 > > > sd1(ahc0:1:0): Direct-Access 4148MB (8496884 512 byte sectors) > I've read the tutorial you pointed and followed the manual steps. > Here are the results: Hm, interesting. Can you please post the output of `disklabel sd1' and `dmesg'? It's acting like the in-core disklabel for sd1 is blank, which isn't correct. > [1013]ns3:/etc>dd if=/dev/zero of=/dev/rsd1 count=2 > 2+0 records in > 2+0 records out > 1024 bytes transferred in 1 secs (1024 bytes/sec) > [1014]ns3:/etc>disklabel /dev/rsd1 | disklabel -B -R -r sd1 /dev/stdin > Warning, revolutions/minute 0 > boot block size 0 > super block size 0 > line 12: 0: bad rpm > line 13: 0: bad interleave > Warning, revolutions/minute 0 > [1015]ns3:/etc>newfs /dev/rsd1c > newfs: ioctl (GDINFO): Invalid argument > newfs: /dev/rsd1c: can't read disk label; disk type must be specified Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980114143609.27200E-100000>