Date: Tue, 24 Aug 2004 10:41:36 +0200 (MEST) From: Ragnar Lonn <prl@gatorhole.se> To: <freebsd-hardware@freebsd.org> Subject: Lavalink DSerial card on FreeBSD 4.10? Message-ID: <Pine.GSO.4.33.0408231644550.19061-100000@pommac>
next in thread | raw e-mail | index | archive | help
Hi all, I'm trying to get a Lavalink DSerial 3.3V PCI-X card to work on FreeBSD 4.10 but with no luck so far. The machine is a HP Proliant DL360. We compiled in the puc driver and now it sees the card as: puc0: <Lava Computers serial port> port 0xfff8-0xffff irq 15 at device 5.0 on pci7 Below is the dmesg output. Does anyone have any clues as to how to get all three serial ports (the original, COM1 on the motherboard plus the two ports on the Lava card) to work? Regards, /Ragnar pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7ef0000-0xf7ef3fff,0xf7fc0000-0xf7ffffff irq 11 at device 4.0 on pci1 bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7fb0000-0xf7fbffff irq 5 at device 5.0 on pci1 bge0: Ethernet address: 00:0b:cd:1b:33:bd miibus0: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics accelerator> at 3.0 irq 7 pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 3 pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 15 isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0-0x3,0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib2: <ServerWorks host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib7: <ServerWorks host to PCI bridge> on motherboard pci7: <PCI bus> on pcib7 puc0: <Lava Computers serial port> port 0xfff8-0xffff irq 15 at device 5.0 on pci7 sio1: type 16550A pci7: <unknown card> (vendor=0x1407, dev=0x0111) at 5.1 irq 0 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0724 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A acd0: CDROM <CRN-8245B> at ata0-master PIO4 Mounting root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.33.0408231644550.19061-100000>